Test Case

Show / Hide direct link   <ROOT> 1371PA: Ethernet Function verification Test - PP-80424



Version 5.99999999999999
Created on 15/06/1999 20:49:29  by Tadashi Ishikawa
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:Yes Phase:SIT, SIV, (BBFV)
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify Network / Modem(Mini-PCI) adapter H/W compatibility
CRITERIA
  • No functional error
  • No functional degradation against predecessor and desktop system
EUT QUANTITY
One system
EQUIPMENT
Portable Network Lab. Facilities.
Critical Attribute:[0] : ETN - Ethernet

CONFIGURATION
During FVT following test items needs to be covered. However based on the product schedule / change information and single phase, where no SIV is there, then test items will be decided based on the strategy at that time.

1. Network Installation and Basic Function Test
2. Nework reliability and Perofmance function test
3. Network : Wake on Settings test

REFERENCE PROCEDURE
STATISTIC INFO
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Use the above.
OTHER DETAILS
EUT Quantity : One system 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
Network driver/applications may have other functions/GUI not mentioned in this test case. Please verify all the available functions and GUI that comes with the particular version of driver/applications. Any updation required to the test case, Please inform IBM Engineer/test case owner.

Check all the adapter combination.


Adapter Name
Card Revision (Example 3B2....)
Phase Entry :
Phase Exit :



Fill out the following or attach the ATS system information file. Specify driver/EEPROM/firmware/card revision tested for Entry/Exit period.
Windows XP

Phase Entry :
Phase Exit :
EUT
BIOS
H8
Preload Image
Wireless Driver
Ethernet Driver details
EEPROM for Ethernet
Modem Driver
Audio
Video
ThinkPad Utility
Access Connections
Other driver details

TEMS Reviewer Log:Yasushi Yanagisawa on 99/08/31
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.