Test Case

Show / Hide direct link   <ROOT> 2550PA: Wireless Function Test - PP-80364



Version 3.7
Created on 16/07/2002 10:58:29  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:SIT, SIV, (BBFV)
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify 802.11a/b wireless function on ThinkPad systems.
CRITERIA
All the wireless functions should work in both 802.11a mode,802.11b mode and auto mode
No system degradation due to system interference
EUT QUANTITY
Two systems.
EQUIPMENT
Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
During FVT following test items needs to be covered. However based on the product schedule / change information and single phase, where no SIV is there, then test items will be decided based on the strategy at that time.

1. Wireless LAN - Installation and configuration
2. Wireless LAN - Basic Function Test
3. Wireless Radio Contro - Hotkey function verification
REFERENCE PROCEDURE
STATISTIC INFO
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
EUT Quantity : Two systems. 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
Test Item
Win XP
Vista
Driver Installation
Wireless utilty
Basic wireless functions
Encryption verification
Roaming feature
Power Management functions
Longrun functions


Wireless driver/applications may have other functions/GUI not mentioned in this test case. Please verify all the available functions and GUI that comes with the particular version of driver/applications. Any updation required to the test case, Please inform Lenovo Engineer/test case owner.

Check all the adapter combination. Contact System adminstrator for MAC Address registration / Encryption & Access Point details

Test to be performed in Admin mode and User Mode.
Set the Channel from 1~13 (if Access Point supports 14 then check channel 14 also) and test all the functions.
Wireless Full Function test is covered by Access Connection test item.

Perform the Wireless Basic function test for all the supported WLAN adapter and ALL THE SUPPORTED SKUs.

SUPPORTED ADAPTER FOR THIS PRODUCT
Adapter Name
Card Revision (Example 3B2....)
Firmware Version
Phase Entry :
Phase Exit :
Phase Entry :
Phase Exit :



Fill out the following or attach the ATS system information file. Specify driver/EEPROM/firmware/card revision tested for Entry/Exit period.
Windows 7 32 bit

Phase Entry :
Phase Exit :
Windows 7 - 64bit

Phase Entry :
Phase Exit :
EUT
BIOS
H8
Preload Image
Wireless Driver
Ethernet Driver details
EEPROM for Ethernet
Modem Driver
Audio
Video
ThinkPad Utility
Access Connections
Other driver details



TEMS Reviewer Log:07/19/2002 06:20:07 PM by Kazuo 1 Matsumoto/Japan/IBM (Review Comment: OK
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.