Test Case

Show / Hide direct link   <ROOT> 2883PA: =ROOT= W7: FFRT (Network Team) - Win-7 - PP-80401



Version 4
Created on 24/03/2004 16:26:34  by Muralidharan Seshadri
Last modified on  10/06/2016 18:38:13  by m_komatsu_nw
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:SVT, SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:EE
CRITERIA

EUT QUANTITY

1

EQUIPMENT

Critical Attribute:[0] : WLS - Wireless

CONFIGURATION

REFERENCE PROCEDURE
STATISTIC INFO
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS

EUT Quantity : 1 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."

2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)" (All Test Activity should be performed with AMT Enabled) ADAPTER LIST - Fill all the details in the table below.

Adapter Name
Card Revision (Example 3B2....)
Firmware Version
Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Fill out the following or attach the ATS system information file. Specify driver/EEPROM/firmware/card revision tested for Entry/Exit period.

Windows 8

Phase Entry :

Phase Exit :

Win 7 - 32bit

Phase Entry :

Phase Exit :

Win-7

Phase Entry :

Phase Exit :

EUT
BIOS
H8
Preload Image
Wireless Driver
Ethernet Driver details
EEPROM for Ethernet
Modem Driver
Audio
Video
ThinkPad Utility
Access Connections
Other driver details

Access Point Tested

Access Point Name
Authentication Configured
Remarks
for eg. Cisco 1200 JP region . Firmware version 15 WPA-PSK / WPA

FFRT should be done using the latest Preload Image available at that time and update the necessary drivers.

Only when Preload image is not available, ghost image can be used.

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
Modified last: 2016-06-10 18:38:13.624, by Miyuki Komatsu_nw
Modified last: 2016-06-10 18:26:24.867, by Miyuki Komatsu_nw