Test Case

Show / Hide direct link   <MAIN> 2885PA: W7: FFRT : Wireless LAN Function Test - PP-80403



Version 2.8
Created on 24/03/2004 16:29:45  by Muralidharan Seshadri
Last modified on  10/06/2016 18:28:29  by m_komatsu_nw
Summary
Preconditions
Status:   Review Complete
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:Yes Phase:SVT, SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify the Wireless function of all supported wireless adapters
CRITERIA

All the wireless adapters basic function should work.

All PM related operations shoud work.

No system malfunction or side effect.

EUT QUANTITY

2

EQUIPMENT

PPA Networking facilities.

Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin7- 64bitWin7- 32bit
1 Wireless ON/OFF in BIOS AAAA
2 Basic Verification AAAA
3 Basic Network functions AAAA
4 Basic Network functions with Power Save Mode options AAAA
5 Peer-to-Peer Network (Ad-Hoc Mode) AAAA
6 Windows - 7 Zero Configuration verification AAAA
7 Power Management AAAA
8 Wireless LAN Device AAAA
9 Wireless Radio Control (Hotkey) Function AAAA
10 Hotkey Utility Function in Systems with Software Switch (without Global Switch) AAAA
11 Wireless OSD / Hotkey Utility Verification with Software Switch/BIOS setting AAAA
12 F9 Verification with Software Switch/BIOS setting AAAA
13 WLAN Device Co-existence with Access Connections Mobile Hotspot AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Wireless ON/OFF in BIOS - UR-1935DS

Test Item Criteria
Result
Win 7 32bit
Win 7 64bit
Enabled/Radio On Wireless LAN in Bios

1. Enter to BIOS setup by pressing F1 button

2. Under Security > I/O port Access > Wireless LAN choose Enabled

4. Press F10 to save the settings.

5. Boot to OS

Expected: The adapter should be visible in OS and configurable.

6. Install the driver and confirm that the Wireless adapter works fine.

7. Verify the functions of Wireless Radio ON and OFF.

Expected: Radio ON and OFF should function properly

- Adapter should be visible in OS

- Adapter can be configured

- Wireless Radio ON/OFF function must work

Disabled Wireless LAN in Bios

1. Enter to BIOS setup by pressing F1 button

2. Under Security > I/O port Access > Wireless LAN choose Disabled

4. Press F10 to save the settings.

5. Boot to OS

Expected: The adapter should NOT be visible in OS

-Adapter should not be visible in OS

- Adapter cannot be configured

LL - 001259PA

Install latest WL driver, hotkey, AC

Restart the system

Make sure WL radio can be turn ON/OFF with wireless OSD.

Shutdown the system.

Boot & Go to BIOS setting by pressing F1

Disable the WL adapter in BIOS, then boot to OS, make sure WL adapter is not displayed in wireless OSD and in device manager==>Expected

Enable the WL adapter in BIOS, then boot to OS, wireless OSD must show the WL adapter status correctly and profile from AC should connect correctly

Wireless Radio status message shown correct based on the BIOS setting status

Profile to connect successfully when the WL is enabled in the BIOS.

Note : Installation to be verified on all Systems even if the test is shared amongst the products.

Basic Verification

Test Item Config
Result
Win 7 32bit
Win 7
Installation (Admin Mode)

- Install the driver in Admin mode using setup

- Check that the installation is successful

- Uninstall the application from 'Add/Remove programs'

- Confirm that application is removed completly.

- Install the application again.

- Check for the correct driver version and firmware version

Stand alone
Overwrite/Update Installation

- Perform overwrite installation for the same driver version (INF installation)

- Check that the driver can be installed properly and no malfunction occurs

- Perform update installation from the previous version

- Check for the driver date and version.

- Verify the overwrite installation function by recovering preload and update the driver for all the applicable preloaded OS.

(LL-00950)

Stand alone
Installation/Uninstall (user mode) (UR-03028AP)

Broadcom Walton

Install

- Install the driver in user mode using setup

- Error Message should appear and installation will not continue

Uninstall

- Uninstall the application from 'Add/Remove programs'

- Error Message should appear and uninstallation will not continue

Intel and Realtek

Install

- Install the driver in user mode using setup

- It should prompt that "A program needs your permission to continue".

- Type an administrator password, and then click OK.

- confirm that wireless driver is properly installed

Uninstall

- Uninstall the application from 'Add/Remove programs'

- It should prompt that "A program needs your permission to continue".

- Type an administrator password, and then click OK.

- confirm that wireless driver is properly uninstalled

Stand alone
  • Installation and uninstallation of application in user mode will continue after typing the correct admin username and password for Intel and Realtek Wireless LAN.
Firmware Updation Check for the correct wireless firmware version

- Use e-Flash utility to update the driver

- Confirm that no error occurs during the e-Flash update

- Check if the firmware is updated properly.

(E-flash Currently supported for Win 7 32bit. However works fine in Win 2K and Win NT) [For Win 98/Win ME Use Diskette method to update the firmware].

Stand alone
Driver version

Verify the installed drive version and confirm that it is same as the one mentioned in the build letter.

All the firmware/driver version should show the latest installed version correctly.

Change some paramters and press OK

Again Open the properties window and confirm that all the tab appears

Stand alone
Radio On/OFF

- Power off Wireless radio

- Confirm that the wireless utiltiy shows radio off

- Power ON wireless radio

- Check the wireless utility picks up the nearest access point

Enable IR and Bluetooth

- Confirm that all wireless, bluetooth and IR are power ON

- Leave the system for 20 minutes in idle condition.

- Verify that the system functions well without any malfunction/performance degradation.

Standalone
Speed comparison between Access Connections and Window's Native [UR-03143AP]

- Launch Access Connections > connect to an Access point

- Check the speed in AC GUI, ACWLicon and QcTray icon.

- Open the windows network connection status at the taskbar (Windows Native)

- Make sure that the speed in Access Connections and Windows Native are the same

Note:

ECR83963 The adapter speed in Access Connection components must be consistent with Windows Live

Standalone
- Signal Status

- Check that the Wireless adapter is associated with the Access point

- Confirm that the signal strength is strong when placed near access point

Stand alone
System Restart

- Open Access connection application

- Restart the system (x 22 times)

- Confirm that the system restarts without any problem

Expected Success rate : 100%

Stand alone
Update/Overwrite Installation with wireless profiles

1 Create multiple profiles one with encryption key and another without encryption key

2. Confirm the wireless functionality with both the profiles

3. Perform overwrite installation or driver update from older version to new version.

4. Verify that the profiles already created can be used without any problem

Stand alone
Enable/Disable Wireless Adapter from Windows Native [UR-03285AP]

1. Connect to any access point.

2. From the system tray, right-click on the Wireless Network Connection icon and select disable. The adapter should be disabled.

3.Go to Control Panel>Network Connections, right-click on the Wireless Network Connection icon and select enable.The adapter should be enabled successfully.

4.Go to device manager, disable the WLAN adapter.The adapter should be disabled.

5.Re-enable the WLAN adapter. The adapter should be enabled successfully.

ECR112140 XP:Cannot disable wifi from system tray or Network Connections

Stand alone

Note :

1. Update the latest firmware of the adpater and use the latest card revision of the adapter.

2. Register adapter MAC address to the Access Point list

3. Get Encryption key and SSID name from system administrator

4. For Windows XP, check all the test items both in Operating system mode and Wireless configuration utility mode. For details, check the reference procedure section.

Test to be performed in Admin mode and User Mode

Basic Network functions

TEST ITEM Result
Win 7 32bit
Win-7
TCP/IP

1.Configure TCP/IP (Static IP address) only

2.Ping to server with 2048 bytes

3.Download files using ftp

4.Configure TCP/IP (DHCP) only

5.Download files using ftp (>300MB files)

6.Configure Internet Explorer 5 (or latest)

7.Download files from the internet

8.Map shared network directory and copy files.

9.Configure TCP/IP

10.Using FTP download files of >300 MB

11.Using shared directory copy files of > 300 MB

*1 : For Windows XP, check all the test items both in Operating system mode and Wireless configuration utility mode. For details, check the reference procedure section.

Basic Network functions with Power Save Mode options

TEST ITEM Result
Win 7 32bit
Win-7
In Device Manager->Network adapters->select the wireless adapter

Double click to pop up properties window.

in Advanced tab, property window,

Set the Power Save Mode option to "Always Enable" option and perform the following

TCP/IP

1.Configure TCP/IP (Static IP address) only

2.Ping to server with 2048 bytes

3.Download files using ftp

4.Configure TCP/IP (DHCP) only

5.Download files using ftp (>300MB files)

6.Configure Internet Explorer 5 (or latest)

7.Download files from the internet

8.Map shared network directory

9. Copy files.

10.Configure TCP/IP

11.Using FTP download files of >300 MB

12.Using shared directory copy files of > 300 MB

In Device Manager->Network adapters->select the wireless adapter

Double click to pop up properties window.

in Advanced tab, property window,

Set the Power Save Mode option to "Auto Enable" option and perform the following

TCP/IP,

1.Configure TCP/IP (Static IP address) only

2.Ping to server with 2048 bytes

3.Download files using ftp

4.Configure TCP/IP (DHCP) only

5.Download files using ftp (>300MB files)

6.Configure Internet Explorer 5 (or latest)

7.Download files from the internet

8.Configure NetBEUI only

9.Map shared network directory and copy files.

10.Configure TCP/IP and NetBEUI

11.Using FTP download files of >300 MB

12.Using shared directory copy files of > 300 MB

Also check with the Power save Mode option as 'Disable'

Peer-to-Peer Network (Ad-Hoc Mode)

TEST ITEM Result
Win 7 32bit
Win-7
Ad-Hoc Mode

1.Configure two or more wireless systems

2.Configure NetBEUI protocol and enable file and print sharing in both the system

3.Share directory and printer

4.Connect these two systems in an Ad-Hoc Mode

5.Browse the network and access the resources of the other computer

6.Suspend and resume

7.Confirm the network connection

8.Copy files from the shared directory of the remote computer

9.Hibernate and resume

10.Confirm the network connection

11.Copy files from the shared directory of the remote computer

Performance

Connect to network through access point

Measure the the throughput by downloading files

for 1 Mbps

for 5 Mbps

for 11 Mbps

for 54 Mbps

for 150/300/450Mbps for the supported adapters/Access Points.

Measure the throughput for both TCP/IP

Windows - 7 Zero Configuration verification

Test Item Config *1
Result
Win 7
Installation / Configuration
Windows 7- Zero configuration

1. Control Panel->Network and Internet->Network and Sharing Center->Connect to a network

2. Connect to a network window will show on the lower right portion of desktop which lists all the available Access points.

3. Select the correct Access point and configure the same with SSID,Encryption etc..

Stand alone
- Select the Access point from the list

- Configure Wireless using OS properties

- Confirm that the wireless work properly.

- Suspend and resume after one minute

- Check for the wireless connectivity

- Hibernate and resume after one minute

- Confirm that the wireless works properly

Stand alone

1. Configure two access points with same network name.

2. Connect to the network

3. Perform test by following the check sheet.

3-1. Power Management in AC Mode (Static IP)

3-2.Power Management in DC mode (DHCP)

3-3 Performance after PM

Note :

Wireless Radio must retain the status that was available before PM event or system restart.

ie. If Radio ON before Suspend, On resuming from suspend it should be still ON

if Radio OFF before Suspend, on resuming from suspend it should be still OFF.

Power Management

TEST ITEM Result
Win 7 32bit
Win 7
Power Management in AC Mode
Configure TCP/IP (Static IP)

Browse the netowork for confirmation

Enter into suspend

Resume after one minute

Download files from the network

Enter into Hibernation

Resume after one minute

Download files from the network

Power Management in DC mode

Configure TCP/IP (DHCP)

Browse the netowork for confirmation

Enter into suspend

Resume after one minute

Download files from the network

Enter into Hibernation

Resume after one minute

Download files from the network

Power Management by LID close
  1. Connect to network through access point
  2. Perform suspend by LID close
  3. Resume from suspend, and check function

    CRITERIA: 'Ping' to default GW works

  4. Repeat steps 2 - 3 for 5 times
Power Management by TimerConnect to network through access point

Perform suspend by timer (set for 2 minutes)

Resume from suspend

Confirm the functionality of the wireless adapter

Perform Hibernation by timer (set for 2 minutes)

Resume from Hibernation

Confirm the functionality of the wireless adapter

Suspend with Radio ON/OFF

Connect to network through access point

Ensure that Radio is ON

Perform suspend (Fn+F4)

Resume from suspend

Confirm the functionality of the wireless adapter

Turn WL Radio is OFF

Perform suspend (Fn+F4)

Resume from suspend

Confirm the functionality of the wireless adapter

Hibernate with Radio ON/OFF

Connect to network through access point

Ensure that Radio is ON

Perform Hibernate (Fn+F12)

Resume from hibernation

Confirm the functionality of the wireless adapter

Turn OFF WL Radio.

Perform suspend (Fn+F12)

Resume from hibernation

Confirm the functionality of the wireless adapter

Performance after S1 state

Connect to network through access point

Perform S1 and resume.

Measure the the throughput by downloading files

for 1 Mbps,for 5 Mbps,for 11 Mbps

Measure the throughput for both TCP/IP

Performance after S3 state

Connect to network through access point

Perform S3 and resume.

Measure the the throughput by downloading files

for 1 Mbps,for 5 Mbps,for 11 Mbps

Measure the throughput for both TCP/IP

Performance after S4 state

Connect to network through access point

Perform S4 and resume.

Measure the the throughput by downloading files

for 1 Mbps,for 5 Mbps,for 11 Mbps

Measure the throughput for both TCP/IP

Wireless LAN Device

Test Item
Criteria
Result
Win 7 32bit
Win 7
- Device Manager entry

- Check Basic WLAN connectivity

- Suspend and Resume

- Check Basic WLAN connectivity

- File copy

Repeate the above steps 5 times

- No system and application hang after resume from suspend.

- WLAN adapter should be visible in Device Manager after resume from suspend.

- Better file transfer throughput

- No WLAN performance degradation

- Device Manager entry

- Check Basic WLAN connectivity

- Hibernate and Resume

- Check Basic WLAN connectivity

- File copy

Repeate the above steps 5 times

- No system and application hang after resume from hibernate.

- WLAN adapter should be visible in Device Manager after resume from hibernate

- Better file transfer throughput

- No WLAN performance degradation

- Device Manager entry

- Check Basic WLAN connectivity

- Warm boot [system restart]

- Check Basic WLAN connectivity

- File copy

Repeate the above steps 5 times

- No system and application hang after system restart.

- WLAN adapter should be visible in Device Manager after system restart.

- Better file transfer throughput

- No WLAN performance degradation

- Device Manager entry

- Check Basic WLAN connectivity

- Shutdown and Restart

- Check Basic WLAN connectivity

- File copy

Repeate the above steps 5 times

- No system and application hang after shutdown and restart.

- WLAN adapter should be visible in Device Manager after shutdown and restart.

- Better file transfer throughput

- No WLAN performance degradation

Enable Bluetooth device

Establish BT connectivity with other system / device and do some transfer through BT

When BT transfer is in progress, check WLAN performance through file transfer

If WLAN performance is not satisfactory, turn off the BT and try again.

If WLAN performance is poor with BT enabled, report the issue accordingly.

- No WLAN throughput performance degradation

WLAN Device Co-existence with Access Connections Mobile Hotspot - UR4124AP

Test Item
Criteria
Result
Win 7
- Device Manager entry

- Check WLAN connectivity

- Launch Access Connections

- Start Mobile Hotspot and connect clients

- Check again WLAN connectivity

Note: While testing Mobile Hotspot, observe host connectivity.

- No limited connection / disconnect after starting Mobile Hotspot in Access Connections

- No system and application hang after starting Mobile Hotspot in Access Connections

- WLAN adapter should still be visible in Device Manager after starting Mobile Hotspot in Access Connections

- No WLAN performance degradation

Wireless Radio Control (Hotkey) Function

Please perform this on all the supported wireless/bluetooth adapters.

Please perform these tests in both Administrator mode and User mode

All these test should be performed in AC and Battery Mode.

Note:

Install and configure Wireless & Bluetooth adapter

1. Install Access Connection and Hotkey utility as mentioned in the build letter [UR-1377DS] / UR-2516

Test Item
Windows XP
Win-7
Hotkey utilility installation

- Install latest Hotkey utility

- Press Fn+F5 and confirm wireless Radio utility pops up

- There will be two tabs, "Location Profile" and "Wireless Radio" on screen

- Check "Location Profile" tab has no entry since no AC profile is not created yet.

- Check "Wireless" tab and confirm Wireless Power Off/On works properly.

- Create profiles using Access Connection

Hotkey utilility installation for Windows 7

- Install latest Hotkey utility

- Press Fn+F5 and confirm wireless Radio utility pops up

- There will be only one tab, "Wireless Radio" on screen

- Check "Wireless" tab and confirm Wireless Power Off/On works properly.

NA
A
Hotkey utilility un-installation

- Uninstall hotkey utillity (when we run setup, it will prompt for uninstallation)

- Press Fn+F5 and confirm that the radio control utility does not pop-up

Menu Verification

- Press Fn+F5, select Fn+F5 settings option,

- Confirm that all the options are shown both in user mode and admin mode.

- Select the option "Show a menu that allows me to control power settings for wireless radios in my system".

- Enable subselection item "Allow selection of location profiles with Fn+F5 On Screen Display menu"

- Close Fn+F5.

- Press Fn+F5. Confirm that two tabs appear (Wireless radio and Location profiles)

- Select Location Profiles and select any wireless Profile and apply.

- Confirm that the profile can be connected

- Now unselect the option "Allow selection of location profiles with Fn+F5 on Screen Display menu"

- Close Fn+F5.

- Press Fn+F5 to launch the utility.

- Confirm that only one tab appears (Wireless radio tab only).

Menu Verification for Windows 7

- Press Fn+F5, select Fn+F5 settings option

- Confirm that all the options are shown both in user mode and admin mode.

- Select the option "Show a menu that allows me to control power settings for wireless radios in my system".

- Close Fn+F5.

- Press Fn+F5. Confirm that only one tab appears (Wireless radio tab only).

NA
A
Settings

- Click on Settings button

- Select 'Alternate between turning all wireless radios off and turning all radios on"

- Press OK and then close the utility

- Note : With this Fn+F5 key will work as toggle switch

- Check the wireless radio status...It should be ON

- Press Fn+F5

- Now the utility will pop with the message

"all wireless radios have been turned off"

- Press Close button

- Press Fn+F5

- Now the wireless radio will be turned on with the message

- "All wireless radios have been turn on"

- Repeat this step pressing Fn+F5 20 times and confirm that it works as toggle switch properly.

Settings for Windows 7

- Click on Settings button

- Select 'Alternate between turning all wireless radios off and turning all radios on"

- Press OK and then close the utility

- Note : With this Fn+F5 key will work as toggle switch

- Press Fn+F5

- Wireless Radio Control window with message "Do you want to power all wireless radios ON or power all wireless radios OFF?" appears.

- Click ON button.

- Check the wireless radio status...It should be ON.

- Now the utility will pop with the message

"All wireless radios have been powered on."

- Press Close button

- Press Fn+F5

- Wireless Radio Control window with message "Do you want to power all wireless radios ON or power all wireless radios OFF?" re-appears.

- Click OFF button.

- Check the wireless radio status...It should be OFF.

- Now the utility will pop with the message

"All wireless radios have been powered off."

- Press Close button

- Repeat this step pressing Fn+F5 20 times and confirm that it works properly.

NA
A
Exclusive Radio Control functionality [UR-2714AP]

Confirm that the Wireless Radio is present.

Confirm also that the Wireless WAN Radio is present.

With WLAN and WWAN radio:

Turn ON the Wireless Radio.

Confirm that the Wireless Radio is turned ON.

Turn ON the Wireless WWAN Radio.

Confirm that the Wireless WWAN Radio is turned ON and the Wireless Radio is turned OFF.

With WWAN and WLAN radio:

Turn ON the Wireless WWAN Radio.

Confirm that the Wireless WWAN Radio is turned ON.

Turn ON the Wireless Radio.

Confirm that the Wireless Radio is turned ON and the Wireless WAN Radio is turned OFF.

If WiMAX Radio is present:

Confirm that the WiMAX Radio is present.

With WiMAX and WLAN radio:

Turn ON the WiMAX Radio.

Confirm that the WiMAX Radio is turned ON.

Turn ON the Wireless Radio.

Confirm that the Wireless Radio is turned ON and the WiMAX Radio is turned OFF.

With WiMAX and WWAN radio:

Turn ON the WiMAX Radio.

Confirm that the WiMAX Radio is turned ON.

Turn ON the Wireless WWAN Radio.

Confirm that the Wireless WWAN Radio is turned ON and the WiMAX Radio is still ON.

Select 'All Off' radio and confirm that all radios are turned OFF.

Reference Defects:

ECR52546, SAR:ALL:ExclusiveRadioCntrl not work w/AccessCon bld14 & Hotkey bld13

ECR52524, SAR:W7:Exclusive radio control not working after AccessCon upgrade

ECR52414, SAR:ALL:ExclusiveRadioControl not function when AC not install

With Power Management

Press Fn+F5, and confirm that the Wireless radio is ON

Suspend the system using Fn+F4.

Resume after one minute.

Press Fn+F5 and confirm that the wireless radio is still ON.

Press Fn+F5 and confirm that the Wireless radio is ON.

Suspend the system by LID close.

Resume after one minute.

Press Fn+F5 and confirm that the Wireless radio is still ON

Press Fn+F5, and confirm that the Wireless radio is ON

Hibernate the system using Fn+F12

Resume after one minute.

Press Fn+F5 and confirm that the wireless radio is still ON.

Press Fn+F5, and confirm that the Wireless radio is OFF

Suspend the system using Fn+F4.

Resume after one minute.

Press Fn+F5 and confirm that the wireless radio is still OFF.

Press Fn+F5 and confirm that the Wireless radio is OFF.

Suspend the system by LID close.

Resume after one minute.

Press Fn+F5 and confirm that the Wireless radio is still OFF.

Press Fn+F5, and confirm that the Wireless radio is OFF

Hibernate the system using Fn+F12

Resume after one minute.

Press Fn+F5 and confirm that the wireless radio is still OFF.

If battery is detached/attached from the system.

1. Press Fn+F5

2. Confirm that the Wireless radio is ON

3. Hibernate the system using Fn+F12.

4. Detach then attach the battery from the system.

5. Resume after 1 minute.

6. Press Fn+F5

7. Confirm that Confirm that the Wireless radio is still ON.

8. Press Fn+F5

9. Confirm that the Wireless radio is ON.

10. Power OFF the system.

11. Detach then attach the battery from the system.

12. Power On the system.

13. Press Fn+F5

14. CConfirm that Confirm that the Wireless radio is still ON.

Reference:

ECR83745 All:Master Control in FnF5 turns OFF if detach/attach battery DC mode

Criterial : System should retain the previous Radio status after PM, System restart for all wireless adapters)

Remove the Wireless adapter from the system

Start the system

Press Fn+F5.

When NO wireless adapter/Bluetooth adapter is present, it should report the error message that 'No wireless/bluetooth adapter is present"

Global Switch ON/OFF message confirmation with/without Access Connections installed [LL-1448PA]

With Access Connections Installed

1. Install latest Wireless driver and restart the system.

2. Install latest Hotkey and restart the system.

3. Install latest Access Connections and restart the system.

4. Upon system reboot.

5. Turn OFF Global Switch.

6. Confirm pop-up Wireless Radio Status window will show:

"All Wireless radios are now off"

7. Turn ON Global Switch.

8. Confirm pop-up Wireless Radio Status window will show:

"The master control for all wireless radios is now on. Each wireless radio has returned to the last known power state.

To modify the power statest of the wireless radios, close this Window then press Fn + F5."

Without Access Connections Installed

1. With latest Wireless and Hotkey installed.

2. Uninstall Access Connections and restart the system.

3. Upon system reboot.

4. Turn OFF Global Switch.

5. Confirm pop-up Wireless Radio Status window will show:

"All Wireless radios are now off"

6. Turn ON Global Switch.

7. Confirm pop-up Wireless Radio Status window will show:

"The master control for all wireless radios is now on. Each wireless radio has returned to the last known power state.

To modify the power statest of the wireless radios, close this Window then press Fn + F5."

Global Switch ON/OFF with BIOS [UR-03331SG]

Enter to BIOS setup by pressing F1 button

Under Security > I/O port Access > Disable all wireless I/O

- Wireless LAN

- Wireless WAN

- WiMax

- Bluetooth

Press F10 to save the settings

Reboot the system

Turn Global Switch ON or OFF

Confirm NO notification message appear

Press Fn+F5

Confirm a message appear:

Related Defects:

ECR120697/ECR120698/ECR120685, ALL:Global Switch OFF/ON no response in LCD/OS

  • Since no radio is available to turn OFF/ON, message should not appear when turning OFF/ON Global switch

Wireless OSD / Hotkey Utility Verification with Software Switch/BIOS setting - UR-2610AP

Device
BIOS Settings
Software Switch
Criteria
Result
Result
W7 -32 bit
Win 7 64bit
Wireless
Enabled with Radio On
ON
F9 should list Wireless with Turn ON/OFF options

Should be able to Turn ON/OFF Wireless Radio

A
A
Enabled with Radio Off
ON
F9 should list Wireless with Turn ON/OFF options

Should allow to change WL Radio ON/OFF

A
A
Disabled with Radio On or Off
ON
F9 should show Wireless
A
A
Enabled with Radio On
OFF
F9 message saying "All radios are Off. To use wireless radios. Please turn on master control above." should appear
A
A
Enabled with Radio Off
OFF
F9 message saying "All radios are Off. To use wireless radios. Please turn on master control above." should appear
A
A
Disabled with Radio On or Off
OFF
F9 message saying "All radios are Off. To use wireless radios. Please turn on master control above." should appear
A
A

OTHER DETAILS

EUT Quantity : 2 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."

2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)" (All Test Activity should be performed with AMT Enabled)

For Supported Adapter, Refer the root Test Plan. This depends on each product support.

ADAPTER LIST

Adapter Name
Card Revision (Example 3B2....)
Firmware Version
Phase Entry :

Phase Exit :

Phase Entry :

Phase Exit :

Fill out the following or attach the ATS system information file. Specify driver/EEPROM/firmware/card revision tested for Entry/Exit period.

Win-7

Phase Entry :

Phase Exit :

EUT
BIOS
H8
Preload Image
Wireless Driver
Ethernet Driver details
EEPROM for Ethernet
Modem Driver
Audio
Video
ThinkPad Utility
Access Connections
Other driver details

Known Limitations/Restrictions/Information

Refer Build letter of Wireless driver and Access Connection for driver installation sequence. Installation procedure may vary from adapter to adapter.
Perform this test both in Admin and User mode.
Use the correct version of the adapter and firmware for the adapter.
For Access Point details, contact network adminstrator
Choose "Alternate between powering off all wireless radios and powering on all radios", will be available not only for WLAN and WWAN. It will turn OFF Bluetooth also. This is working as design and same as old versions of Access Connections which supports Exclusive Radio Control.

TEMS Reviewer Log:
Review Logs
Created last 2016-06-13 13:17:37 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Attached files :

Update History:
Modified last: 2016-06-10 18:28:29.677, by Miyuki Komatsu_nw