Test Case

Show / Hide direct link   <ROOT> 2992PA: Access Connection Function Test - PP-80388



Version 4.4
Created on 13/09/2005 16:58:37  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Test Coverage
Lessons Learned:No Phase:SIT, SIV, (BBFV)
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:sdaf
CRITERIA
asf
EUT QUANTITY
asfd
EQUIPMENT
asdf
Critical Attribute:[0] : WLS - Wireless

[1] : ETN - Ethernet

[2] : MDM - Modem

CONFIGURATION
During FVT following test items needs to be covered. However based on the product schedule / change information and single phase, where no SIV is there, then test items will be decided based on the strategy at that time.

1. AC Installation and Basic profile verification Test
2. AC QCtray & QCWLicon verification test
3. Profile switching verification using ATS
REFERENCE PROCEDURE
STATISTIC INFO
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
EUT Quantity : asfd 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled) SUPPORTED ADAPTER FOR THIS PRODUCT
Adapter Name
Card Revision (Example 3B2....)
Firmware Version
Phase Entry :
Phase Exit :
Phase Entry :
Phase Exit :



Fill out the following or attach the ATS system information file. Specify driver/EEPROM/firmware/card revision tested for Entry/Exit period.
Windows XP

Phase Entry :
Phase Exit :
Windows 2000

Phase Entry :
Phase Exit :
EUT
BIOS
H8
Preload Image
Wireless Driver
Ethernet Driver details
EEPROM for Ethernet
Modem Driver
Audio
Video
ThinkPad Utility
Access Connections
Other driver details


Note :
1. Perform the test in User mode as well as Administrator mode
2. Please check the version of Access Connection to be used for each product. Access Connection may require specific version of device driver to be installed for the adapters to be tested.

Perform Access Connection on Japanese OS for SIT for the final verification. Initial stages of testing can be performed on US version. While doing JP coverage, verify the japanese characters, error messages and help menu contents.

Access Connections applications may have other functions/GUI not mentioned in this test case. Please verify all the available functions and GUI that comes with the particular version of Access Connections. Any updation required to the test case, Please inform Lenovo Engineer
TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.