Test Case

Show / Hide direct link   <MAIN> 3000PA: AC:Qctray & QCWLicon verification test - PP-80395



Version 2.4
Created on 29/04/2009 17:43:18  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:asfd
CRITERIA
asdf
EUT QUANTITY
safd
EQUIPMENT
asfd
Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win7- 64bitWin7- 32bit
1 QCtray Verification AA
2 AC Status Icon (ACWLIcon) Verification AA
3 AC Gadget version verification AA
4 AC Jumplist verification in Windows 7 AA
5 AC tray and ACWL icon verification in the Notification Area Icons with Windows 7 AA
6 AC Toolbar Verification + Profile Switching AA
7 AC Toolbar verification in Windows 7. AA
8 AC Toolbar/AC Gauge Verification with Hotkey AA
9 AC Toolbar verification in User mode with Windows 7 AA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Known Limitations/Restrictions/Information
Known Limitations
1. When two Ethernet adapters are configured, TCP/IP will be obtained by OS. Even if we use IPconfig to release all the IP, then after PM, system will get the IP after searching the DHCP server. To avoid getting the IP address when we use Access Connection, select the option "Disconnect from the Network when I switch to a different location Profile".
2. When user create the profile, automatic location switching is enabled by the default for both wired and wireless adapter. The "Automatic location switching" option will not be available to select. This is working as design.
Restriction
1. Even "Allow all users of this system to create and apply loation profiles" Global settings option check box is checked, limited user account can not modify or create the setting for TCP/IP settings or security settings of local driver share, firewall settings due to Widnows security protection. Such setting is used with Windows default settings. Default is not checked.
2. Global settings can be only modified by the user when the logon privilege is administrator privilege.
3. The global settings option "Disable Adhoc connection type option in wireless LAN profiles" is not applicable, if the user create the profile using WIndows wireless LAN property window.
4. Access Connections Wireless Connection Status window will not have button for Modify WiMAX Settings and Find WiMAX Network. This is as designed as per AC 5.10 Specs Addendum (Doc. # AC510-2-008).
Ref CMVC #102471: VIS: No find and modify WiMAX buttons in ACWLIcon in system tray.
5. When Global Hardware switch is turned off, Wireless WAN components will be removed from Device Manager and Access Connections, therefore ACWLIcon automatically removes Wireless WAN tab. This is working as designed.
Ref CMVC#106855: ALL:ACWLIcon WWAN tab closes when global switch turned OFF.
6. "Connection status window" will not have Power ON/OFF, Find WLAN, Launch Access Connections and Modify Settings buttons for Windows 7 versions of Access Connections. This is as designed as per AC5.5 Spec Addendum 20091019.
ECR48090, W7:Some function buttons in ACWL Connection Status window are missing
7. Access Connections Wireless Connection Status window will not have Power off/on Radio menu when click on it from system task tray.This is as designed as per AC 5.70 Spec Addendum 20100617. Ref. (ECR65690,ECR65689)
Information
1. When "Allow all users of this system to create and apply loation profiles" check box is checked, it allows user to create the location profiles and enables location switching regardless of the windows logon privilege (administrator or limited users).
2. Wireless profiles will be listed in the upper part of the profile list and the Ethernet profiles will be displayed at the lower part of the location profile list on "Automatic switching profile priority window". Due to the faster speed, the Ethernet profiles have higher priority than the wireless profiles.
3. Access Connection Status Icon (QcTray) =
4. Access Connection - Wireless Connection Status icon (ACWLicon) =
5. Access Connection Gauge icon (ACGauge) =

6. Access Connection Gadget (ACGadget) =




AC Status (QCtray) Verification
Test Item Check Item / Criteria
Configuration
Result
Win XP
Win 7
  1. From the system tray click on the "ThinkVantage Access Connection" QCtray icon(Computer icon in the system tray).
  2. Select launch "ThinkVantage Access Connections".
  3. Confirm that the Access Connection application is launched properly.
  • AC application should launch correctly.
  • Information shown in AC main GUI and QCtray should match
Stand alone
  • From the system tray click on the "ThinkVantage Access Connection" QCtray icon.
    1. Select Menu Text size.
    2. Verify that the menu text changes as per the selection made
    3. a)small b) medium and c)Large.
    • Menu size should change as per the selection made.
    Stand alone
  • From the system tray click on the "ThinkVantage Access Connection" QCtray icon.
  • Select any profiles that you want to apply.
  • Are you sure you want to switch to location profile <Profile name> will appear.
  • Confirm by pressing Yes button.
  • Verify that the selected profile is switched properly.
    Repeat step 1 to step 5 for all the profiles and all type of profiles.
    • All the profile switching should work properly from QCtray.
    • No system performance degradation
    Stand alone
  • From the system tray, click the Access Connections QCtray icon. [UR-1186AP]
    1. Select any profiles that you want to apply.
    2. Verify that the selected profile is applied.
    3. Perform system Suspend/Hibernate/Lid-Closed.
    4. Resume from Suspend/Hibernate/Lid-Closed.
    5. Verify that the selected profile is still applied.
    6. Repeat for 5 times.

    Repeat step 1 to step 6 for all profiles and all types of profiles.

    Reference CMVC: 66531f_2: 2K: Intermittent application error after suspend/resume
    • All the profile switching with power management should work properly from QCtray.
    • No system performance degredation.
    • No error message should appear while profile switching or resume from suspend/hibernate/lid-closed.
    Stand alone
  • From the system tray click on the "ThinkVantage Access Connection" QCtray icon.
    1. Select current active profile and press disconnect button.
    2. Confirm that the profile is disconnected successfully.
    3. Select any profile and press connect button.
    4. Confirm that the profile is connected successfully.
    • All the profile connection / disconnection from Qctray should work properly.
    Stand alone
  • Drag mouse pointer to QCtray icon (Computer Icon).
  • Verify that the informations are shown correctly.
  • Keep clicking the QCtray icon continously for 10times
  • Confirm that no application problem or system performance problem occurs.
  • Double click the QCtray icon and confirm that the AC application is launched successfully.
    • Should be able view the information
    • No system performance degradation or application problem on multiple time clicking of QCtray.
    Stand alone
    Create any profile with the profile name more than 30 characters Apply the created profile
    Confirm the profile is connected successfully.
    Move the mouse pointer to the AC task tray icon
    Confirm that all the informations are shown correctly
    • Should be able view the information correctly.
    • All the characters/information shown fully.
    Stand alone

    AC Status Icon (QCTray) Verification [UR-1187DS]/[UR-01492AP]

    Test Item Check Item / Criteria
    Configuration
    Result
    Win XP
    Win 7
    Show ThinkVantage Access Connections status icon in task tray

    Advanced GUI

    1. Launch Access Connections from the task tray or "Start menu -> Programs -> ThinkVantage -> Access Connections".
    2. Click on Advaced button > Tools tab > Global Settings button > Notification tab
    3 .Select/Unselect the option "Show ThinkVantage Access Connections stautus icon in task tray" and click OK
    4.Make sure the AC status icon is shown/not shown in tasktray after selection.

    Basic GUI

    1. Launch Access Connections from the task tray or "Start menu -> Programs -> ThinkVantage -> Access Connections".
    2. Click on Basic button > Options tab
    3 .Select/Unselect the option "Show ThinkVantage Access Connections stautus icon in task tray" and click OK
    4.Make sure the AC status icon is shown/not shown in tasktray after selection.
    • AC Status Icon shall appear/disappear as per the selection
    • No error message shall appear.
    • All the information should be displayed correctly.
    Stand alone
    NA
    Remove ThinkVantage Access Connections status icon in task tray
    1. Go to task tray.
    2. Right Click on Access Connections status icon.
    3. Click Remove this icon.
    4. Make sure the AC status icon is not shown in task tray after selection.




    Reference CMVC:80380 Remove AC status icon and WL status icon on task tray.
    • AC Status Icon should not be shown in tasktray after Right Click icon >> Remove this icon.
    • No error message shall appear.
    • All the information should be displayed correctly.
    • "Show ThinkVantage Access Connections status icon in task tray" should be uncheck in Notification Tab in Access Connections>> Global Stettings.
    Stand alone
    A
    Show Wireless Connection Status icon (ACWLicon) in task tray through AC 5.0 [UR-2014]
    1. Launch Access Connections from the task tray or "Start menu -> Programs -> ThinkVantage -> Access Connections".
    2. Click on Advaced button > Tools tab > Global Settings > Notification tab
    3. Select/Unselect the option "Show wireless stautus icon in task tray" and click OK
    4. Make sure the AC WL status icon is shown/not shown in tasktray after selection
    5. Double click on the ACWLIcon and verify that all the information are shown correctly.
    • ACWL Status Icon shall appear/disappear as per the selection
    • No error message shall appear.
    • All the information should be displayed correctly.
    Stand alone
    NA
    Power Off/On Wireless Radio option removed from AC 5.62 onwards
    1. Launch Access Connections from the task tray or "Start menu -> Programs -> ThinkVantage -> Access Connections".
    2. Click on Advaced button > Tools tab > Global Settings > Notification tab
    3. Select the option "Show wireless stautus icon in task tray" and click OK
    4. Make sure the AC WL status icon is shown in tasktray after selection
    5. In system tasktray, left click ACWLIcon.
    6. Confirm that only View Status is shown in the menu. Power Off/On Wireless Radio option should not be present.


    ECR65690 W7:Power Off/On WL Radio option in ACWLIcon menu is missing
    • ACWL Status Icon shall appear as per the selection
    • No error message shall appear.
    • All the information should be displayed correctly.
    • Power Off/On Wireless Radio option should not be present
    Power Off/On Global Switch (WWAN) - UR-2416
    1. Create and apply any WWAN profile through AC.
    2. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.
    3. Turn OFF Global Switch.
    4. Wireless WAN tab should disappear in Wireless Connection Status window.
    5. Confirm also in Device Manager that WWAN device is not shown and WWAN profile creation in Access Connections is not possible.
    6. Turn ON Global Switch.
    7. Wireless WAN tab should appear in Wireless Connection Status window.
    8. Confirm also in Device Manager that WWAN device appears.



    CMVC# 106855, ALL:ACWLIcon WWAN tab closes when global switch turned OFF
    • When Global Switch is OFF, confirm that WWAN tab in Wireless Connection Status window should disappear and WWAN profile creation is not possible.
    • When Global Switch is OFF, confirm WWAN device in Device Manager is not shown.
    • When Global Switch is ON, confirm that WWAN tab in Wireless Connection Status window shows.
    • When Global Switch is ON, confirm WWAN device in Device Manager is shown.
    Power Off/On Software Switch (WWAN) UR-02572AP
    1. Create and apply any WWAN profile through AC.
    2. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.
    3. Press Fn+F5 / F9 to launch Software Switch
    4. Turn OFF Master Control Switch.
    5. Wireless WAN tab should NOT disappear in Wireless Connection Status window.
    6. Confirm also in Device Manager that WWAN device is shown.
    7. Turn ON Master Control Switch.
    8. Confirm the visibility of Wireless WAN tab in Wireless Connection Status window
    9. Confirm also in Device Manager that WWAN device is shown.

    • When Software Switch is OFF/ON, confirm that WWAN tab in Wireless Connection Status window should NOT disappear.
    • When Software Switch is OFF/ON, confirm WWAN device in Device Manager is show
    Power Off/On Airplane Mode (WWAN) - UR3898AP
    1. Create and apply any WWAN profile through AC.
    2. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.
    3. Press Fn+F5 / F9 to launch Hotkey OSD
    4. Turn OFF Airplane Mode.
    5. Wireless WAN tab should NOT disappear in Wireless Connection Status window.
    6. Confirm also in Device Manager that WWAN device is shown.
    7. Turn ON Airplane Mode.
    8. Confirm the visibility of Wireless WAN tab in Wireless Connection Status window
    9. Confirm also in Device Manager that WWAN device is shown.
    • When Airplane Mode is OFF/ON, confirm that WWAN tab in Wireless Connection Status window should NOT disappear.
    • When Airplane Mode is OFF/ON, confirm WWAN device in Device Manager is show
    Messages shown in ACWLIcon [UR-2644AP]
    When Associated with Wireless LAN


    1. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.

    2. Go to Wireless LAN tab.

    3. Confirm that the message "Access Connections is managing your wireless network (WLAN) connection. To change your wireless network configuration, click Modify WLAN Settings. To find available wireless networks, click Find WLAN." is shown above Connection Status section.

    When Associated with Wireless WAN


    1. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.

    2. Go to Wireless WAN tab.

    3. Confirm that the message "Access Connections is managing your wireless WWAN connection" is shown above Connection Status section.


    When Wireless WAN is Re-Initializing


    1. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.

    2. Go to Wireless WAN tab.

    3. Confirm that the message "WAN adapter is not ready. Wait for few minutes and try again" is shown above Connection Status section.



    When No SIM Card attached


    1. Make sure the machine has no SIM Card attached.

    2. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.

    3. Go to Wireless WAN tab.

    4. Confirm that the message "SIM card not found, Please insert SIM." is shown above Connection Status section.


    When SIM Card is Locked


    1. Make sure the machine has activated SIM Card attached.

    2. Enable SIM card Lock to this profile.

    3. Lock SIM card by entering the wrong PIN.

    4. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.

    5. Confirm that the message "SIM card is locked. Some of the information on this window may not be available while the SIM is locked. To retrieve the complete information, please close this window and unlock the SIM." is shown above Connection Status section.


    When Wireless LAN is associated with Windows Zero Configuration (UR-03067AP)
    1. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.
    2. Go to Wireless LAN tab.

    3. Confirm that the message
    "Not available. The current wireless connection is being managed by the
    Windows Wireless Service or another service."
    in Wireless settings of WLAN.
    4. Go to Mobile Broadband tab.
    5. Confirm that "No message shows."
    in Mobile Broadband Settings.

    When Wireless WAN is associated with Windows Zero Configuration
    1. Launch "Wireless Connection Status" window by double clicking "ACWLIcon" task tray icon.
    2. Go to Mobile Broadband tab.

    3. Confirm that the message
    "Not available. The current wireless connection is being managed by the Windows Mobile Broadband Service or another service." in Mobile Broadband Settings.
    4. Go to Wireless LAN tab.
    5. Confirm that "No message shows."
    in Wireless settings.

    Reference (ECR83818 VIS:Wrong message in Mobile Broadband Settings of ACWLIcon)
    • Confirm the messages shown in ACWLIcon are correct
    Remove wireless status icon in task tray
    1. Go to task tray.
    2. Right Click on Wireless status icon.
    3. Click Remove this icon.
    4. Make sure the Wireless status icon is not shown in task tray after selection.





    Reference CMVC:80380 Remove AC status icon and WL status icon on task tray.
    • ACWL Status Icon should not be shown in tasktray after Right Click icon >> Remove this icon.
    • No error message shall appear.
    • All the information should be displayed correctly.
    • "Show Wireless status icon in task tray" should be uncheck in Notification Tab in Access Connections>> Global Stettings.
    Stand alone
    A
    Remove Access Connections status and wireless status icon in task tray simultaneously.
    1. Go to task tray.
    2. Right Click on Wireless status icon>>Click Remove this icon.
    4. Make sure that the Wireless status icon is not shown in task tray after selection.
    5. Right Click on Access connections status icon>>Click Remove this icon.
    7. Make sure that Access connections status icon is not shown in task tray after selection.
    8. Make sure the Wireless status icon and Access Connections status icon can be removed simultaneously.



    Reference CMVC:80380 in
    • AC status icon and ACWL Status Icon should not be shown in tasktray.
    • No error message shall appear.
    • All the information should be displayed correctly.
    • AC Status Icon and WL status icon should be remove simultaneously.
    • "Show Wireless status icon in task tray" and Show ThinkVantage Access Connections status icon in task tray" should be uncheck in Access Connections>> Global Stettings>> Notification Tab.
    Stand alone
    A
    AC Wireless Connection Status icon toolbar Verification with AC 5.7
    1. On the system task tray, click on the AC Wireless Connection Status icon (ACWLicon)
    2. Confirm ACWWLicon toolbar will launch with only 'View' as options
    3. Click 'View' and confirm 'Wireless Connection Status' launches

    Note:
    This is as designed as per AC 5.70 Spec Addendum 20100617.
    Ref. ECR65690: W7:Power Off/On WL Radio option in ACWLIcon menu is missing
    • Make sure ACWLicon toolbar launches withour error
    • Confirm all option are available and works properly
    UR-2171

    AC Jumplist verification in Windows 7 - UR2432

    Scenario: Check Item / Criteria
    Configuration
    Result
    Win XP
    Win7-32bit
    Win7-64bit
    1.Launch Access Connection and make sure AC launches properly.
    2.Create WL profiles.
    2.Right-click Access Conections icon in the taskbar(left-side)
    3.Verify jumplist launches.
    4.Under Location Profiles confirm all profiles created are shown. Compare with the profiles shown by right-click on AC toolbar icon. Same profiles should be shown.
    5.Connect WL profile from the jumplist.
    6.Confirm profile connects successfully and no error appears.
    7.Under Tasks, click View Status of Wireless Connection...
    8.Comfirm Wireless Connection Status window launches.
    9.Click Manage Wireless Radios...
    5.Confirm Fn+F5 OSD launches and no error message appears.
    stand alone
    NA
    A
    A
    Pin this program to taskbar verification
    1.Launch Access Connection and make sure AC launches properly.
    2.Create WL profiles.
    2.Right-click Access Conections icon in the taskbar(left-side)
    3.Verify jumplist launches.
    4.Click Pin this program to taskbar
    5.Close Access Connections, confirm AC taskbar icon remains in the taskbar.
    6.Confirm Access Connections can be launched from the AC icon in task bar by right-click, Access Connections.
    stand alone
    NA
    A
    A
    WL Profile connection in User Mode
    1.Launch AC. Uncheck option "Allow Windows without administrator privileges to create and apply location profiles" in Tools > Global Settings option
    2.Logon using limited user account(User mode)
    3.Launch Access Connection and make sure AC launches properly.
    4.Right-click Access Conections icon in the taskbar(left-side)
    3.Confirm user cannnot connect location profiles.
    stand alone
    NA
    A
    A

    AC tray and ACWL icon verification in the Notification Area Icons with Windows 7: [UR-2381]

    Test Item Check Item / Criteria
    Configuration
    RESULT
    Win 7 32
    Win 7 64
    1.Install Access connections and the Wireless lan driver.
    2.Click Start -->Control Panel-->Notification Area Icons.
    3.Verify that the Thinkvantage Access Connections AC Tray and Thinkvantage Access connections Wireless lan Icon is listed in the Notification Area Icons
    • Make sure AC and ACWL icon listed in the Notication Area Icons
    Stand alone
    A
    A
    Verifying AC tray and ACWL icon with Notification Area icons behavior1.Select AC tray icon and ACWL icon and click on Behaviors drop down box and make sure the following behavior options are listed
    a)Show icon and notifications
    b)Hide icon and notifications
    c)Only show notifications

    Scenario 1
    2.Select "Show icon and Notifications" option for AC and ACWL icon and click ok.
    3.Make sure the AC tray icon and ACWL icon is shown in the task bar.

    Scenario 2
    4.Select "Hide icon and notifications" option for AC tray and ACWL icon and click ok.
    5.Verify that the AC tray icon and ACWL icon is hidden in the task bar.
    6.Click on "Show hidden icons" arrow in the task bar and verify that the AC and ACWL icon is shown .

    Scenario 3
    7.Select "Only show notifiations" option for AC tray and ACWL icon and Click OK.
    8.Make sure only notifications is shown for AC tray and ACWL icon in the task bar.
    • Make sure AC and ACWL icon has all the following options in the "Notification Area Icon" a)show icon and notifications. b)Hide icon and notifications c)Only show notifications
    • Make sure AC tray icon and ACWL icon is shown in the task bar if "Show icon and notifications" option is selected for AC tray and ACWL icon in the Notification Area Icon
    • Make sure AC tray icon and ACWL icon is hidden in the task bar if "Hide icon and notifications" option is selected for AC tray and ACWL icon in the Notification Area Icon
    • Make sure only notifications for AC tray icon and ACWL icon is shown in the task bar if "Only show notifications" option is selected for AC tray and ACWL icon in the Notification Area Icon
    • Make sure no error message or crash appears .
    Stand alone
    A
    A
    Scenario 4:1.Check the "Always show all icons and notifications on the taskbar" option in the Notification Area Icons and click OK.
    2.Verify that all the Icons(AC and ACWL icon) appears in the Task bar.
    3.Verify that the selection of notification area icons behavior option should be disabled.



    Note:Try the above scenarios in the User mode also.
    • Make sure all the Icons (AC and ACWL icons) appears in the task bar if "Always show all icons and notifications on the task bar" option is selected
    • Make sure the selection of notification area icons behavior option is disabled.
    Stand alone
    A
    A
    Uninstallation of AC only with Notification Area Icons [UR-2489]1.Uninstall Access connections and the Wireless LAN driver.
    2.Click Start -->Control Panel-->Notification Area Icons.
    3.Verify that the Thinkvantage Access Connections Tray and Thinkvantage Access connections Wireless LAN Icon is listed in the Notification Area Icons
    • Make sure AC and ACWL icon listed in the Notication Area Icons not later than 7 days
    Stand alone
    A
    A
    Verifying AC tray and ACWL icon with Notification Area icons option after AC Uninstall1. After AC uninstall, check whether AC tray and ACWL Icons are available in system tray
    2. Click Start -->Control Panel-->Notification Area Icons
    3. In Notification Area Icons, AC tray and ACWL Icon is shown and Click OK.
    4. Change the current system date to 7 days forward (e.g. current date is 8/5, change the date to 8/13)
    5. Reboot the system
    6. After system restart,
    Click Start -> Control Panel -> All Control Panel Items -> Notification Area Icons, AC and AC Wireless Icons should be removed.

    CMVC#108966f_1, W7:AC icon still shows in control panel after uninstall AC
    • Make sure AC and ACWL icon should not be available in system tray after AC uninstall
    • Make sure AC tray icon and ACWL icon should not appear in Notification area after AC uninstall and when the system date change to 7 days onwards.
    Stand alone
    A
    A

    AC Toolbar Verification + Profile Switching UR-2402

    Test Item Check Item / Criteria
    Configuration
    Win7 32
    Win7 64
    Verification of the profile switching with ACtoolbar:

    1.From the system tray click on the AC tool bar.
    2.Select any profiles that you want to apply.
    3.Verify that the selected profile is switched properly.

    Repeat step 1 to step 3 for all the profiles and all type of profiles.

    • All the profile switching should work properly from ACtoolbar.
    • No system performance degradation
    Stand alone
    A
    A
    Verification of Profile connection in ACtoolbar with PM:1.From the System tray, Access connections Toolbar. Select any profiles that you want to apply.
    2.Verify that the selected profile is applied.
    3.Perform system Suspend/Hibernate/Lid-Closed.
    4.Resume from Suspend/Hibernate/Lid-Closed.
    5.Verify that the selected profile is still applied.
    6.Repeat for 5 times

    Repeat step 1 to step 6 for all profiles and all types of profiles.
    • All the profile switching with power management should work properly from ACtoolbar.
    • No system performance degradation.
    • No error message should appear while profile switching or resume from suspend/hibernate/lid-closed.
    Stand alone
    A
    A
    Scenario 1:1.Create any profile with the profile name more than 30 characters
    2.Apply the created profile
    3.Confirm the profile is connected successfully.
    4.Right Click the ACtoolbar and confirm that all the informations are shown correctly
    • Should be able to view the information correctly.
    • All the characters/information shown fully.
    Stand alone
    A
    A
    Scenario 2:1.Create any location profile and make sure profile connection successful.
    2.Edit the profile and change the name of the profile and save.
    3.Click on the AC toolbar and verify whether the edited profile name is reflected properly in the AC toolbar.
    • Should be able to view the information correctly.
    • All the characters/information shown fully.
    Stand alone
    A
    A
    Verification of ACtoolbar with copy & Rename options:1.Create and apply any location profile .
    2.Right click the location profile and select copy and make sure it create a copy of the location profile.
    3.Right click on ACtoolbar and make sure the copied profile is listed correctly.

    Scenario:
    4.Right Click the location profile .Click Rename ,and change the location profile name and make sure it is renamed correctly.
    5.Right Click on the ACtoolbar and make sure the Renamed location profile name is listed correctly.
    • Should be able to view the information correctly.
    • All the characters/information shown fully.
    Stand alone
    A
    A

    AC Toolbar verification in Windows 7. UR-2488 [old:2377]

    Test Item
    Check Item / Criteria
    Configuration
    RESULT
    Win 7 32
    Win 7 64
    Add AC toolbar from Windows Task Bar
    1.Right click on Task bar
    2.Click on Properties-->Toolbars
    3.Taskbar and Start menu properties launches.
    4.Select the checkbox of Access connection
    5.AC toolbar will be added in the Task bar
    • AC toolbar should be added in the Task bar
    Stand alone
    A
    A
    Add AC toolbar from AC Notification Settings1.Launch AC
    2.Switch to Basic mode
    3.Click on Options
    4.Enable the option "Show Access Connections Gauge in taskbar"
    5.AC will prompt " Do you want the Access Connections toolbar on your taskbar?". Select Yes.
    6.AC toolbar will be added in the Task bar

    - Repeat Step 1 to 5 and check option in Advanced mode (Global Settings -> Notification).
    - Repeat Step 1 to 5 and select NO when prompted, and make sure that AC Toolbar is not added onto Windows Taskbar.
    • AC toolbar should be added in the Task bar
    • AC toolbar prompt should work properly
    Stand alone
    A
    A
    Remove AC Toolbar from Windows Task Bar1.Right click on Task bar
    2.Click on Properties-->Toolbars
    3.Taskbar and start menu properties launches.
    4.Uncheck the 'Access Connection' option.
    3.AC toolbar will be removed from the Task bar
    • AC toolbar should be removed from the task bar
    Stand alone
    A
    A
    Remove AC Toolbar from AC Notification Settings1.Launch AC
    2.Switch to Basic mode
    3.Click on Options
    4.Disable the option "Show Access Connections Gauge in taskbar"
    5.AC toolbar will be added in the Task bar

    - Repeat Step 1 to 5 and check option in Advanced mode (Global Settings -> Notification).
    • AC toolbar should be removed from the task bar
    Stand alone
    A
    A
    Verification of Right click options with AC Toolbar1.Right Click on AC Tool bar.
    2.Click 'Launch Access Connection ' and make sure AC launches Properly without any error message.
    3.Click on Wireless Radio Control and make sure the Hotkey window launches properly with out any error message.
    4.Click on ' Show wireless Status ' and make sure the AC WL icon window launches properly without any error message.
    • AC , ACWL icon window and Hotkey window should be launched properly without any error message.
    Stand alone
    A
    A
    Modem Profile creation verification with AC Toolbar 1.Create a modem profile from the location profile window.
    2.Apply the modem profile
    3.Make sure profile connection successfull.
    4.In the task bar AC toolbar should appear and should contain Modem Icon(looks like telephone) and Modem speed.
    • Modem Icon and Modem speed should be displayed in the AC toolbar.
    • Make sure Modem speed displayed in the AC toolbar should be match the modem speed in AC .
    Stand alone
    A
    A
    Ethernet Profile creation verification with AC Toolbar1.Create a Ethernet profile from the location profile window.
    2.Plug the ethernet cable.Apply the Ethernet profile
    3.Make sure profile connection successfull.
    4.In the Task bar AC toolbar should appear and should contain Ethernet Icon and Ethernet speed
    • Ethernet Icon and Ethernet speed should be displayed in the AC Toolbar
    • Make sure Ethernet speed displayed in the AC toolbar matches with the ethernet speed in AC.
    Stand alone
    A
    A
    Wireless Profile creation verification with AC Toolbar1.Create a wireless profile from the location profile window.
    2.Apply the wireless profile-->Make sure profile connection successfull.
    4.In the task bar AC toolbar should appear and should contain Wireless Icon,Signal strength Icon and the Signal strength.
    • Signal strength icon,Signal strength and wireless icon should be displayed in the AC Toolbar
    • Make sure Signal strength displayed in the AC toolbar matches with the Signal strength in AC.
    Stand alone
    A
    A
    WiMAX Profile creation verification with AC Toolbar1.Create a WiMAX profile from the location profile window.
    2.Apply the WiMAX profile-->Make sure profile connection successfull.
    4.In the task bar AC toolbar should appear and should contain WiMAX Icon,Signal strength Icon and the Signal strength.
    • Signal strength icon,Signal strength and WiMAX icon should be displayed in the AC Toolbar
    • Make sure Signal strength displayed in the AC toolbar matches with the Signal strength in AC.
    Stand alone
    A
    A
    WWAN Profile creation verification with AC Toolbar1.Create a WWAN profile from the location profile window.
    2.Apply the WWAN profile-->Make sure profile connection successfull.
    4.In the task bar AC toolbar should appear and should contain WWAN Icon,Signal strength Icon and the Signal strength.
    • Signal strength icon,Signal strength and WWAN icon should be displayed in the AC Toolbar
    • Make sure Signal strength displayed in the AC toolbar matches with the Signal strength in AC.
    Stand alone
    A
    A
    Connect/Disconnect profiles from AC Toolbar1.Create 2 to 3 Profiles in AC.
    2.Right click on the AC toolbar.
    3.It shows the list of Location profiles created in AC.
    4.Select and click any one of the profile from the list.
    5.Make sure the profile connection successful.
    6.Profile connection should be successfull
    7.Click on Disconnect button in AC toolbar.
    8.Verify the profile is disconnected .
    • Make sure profile connection successful if click connect from the AC toolbar.
    • Make sure profile disconnects if click on disconnect button in the AC toolbar.
    Stand alone
    A
    A

    AC Toolbar/AC Gauge Verification with Hotkey [UR-2662SG]

    Test Item
    Check Item / Criteria
    Configuration
    RESULT
    Win 7 32
    Win 7 64
    System with Global Switch:

    2. Install latest Access Connection and latest WLAN driver.
    3. Launch Access Connection and create any Wireless profile
    4. Apply the wireless profile.
    5. Disconnect from the Wireless profile

    6. Confirm that AC Gauge/AC Toolbar shows WL is OFF on task bar
    7. Go to Fn+F5 / F9 Hotkey OSD and make sure WLAN radio OFF
    6. Turn ON WLAN Radioin Fn+Fn / F9 hotkey OSD

    7. Confirm that AC Gauge/ AC Toolbar shows WL is disconnect but not OFF

    System with Software Switch (w/ Access Connection 5.60):

    2. Install latest Access Connection and latest WLAN driver.
    3. Launch Access Connection and create any Wireless profile
    4. Apply the wireless profile.
    5. Disconnect from the Wireless profile

    6. Confirm that AC Gauge/AC Toolbar shows WL is OFF on task bar
    7. Go to Fn+F5 / F9 Hotkey OSD and confirm that WLAN radio is still ON

    Note:

    When disconnecting the profile in Access Connections will show Radio OFF but OSD will show Radio ON. This is as designed as per AC5.6 with SW radio control specs 02-17-10

    Ref: #ECR55814: AC Gauge Taskbar Icon shows OFF even WLAN Radio ON in F9 OSD
    • AC Toolbar/AC Gauge should show correct radio status with Hotkey OSD
    Stand alone
    A
    A

    AC Toolbar verification in User mode with Windows 7

    Test Item Check Item / Criteria
    Configuration
    Win 7 32
    Win 64
    Add AC toolbar to Task bar
    1.Login to User Mode.
    2.Right click on Task bar
    3.Click on Properties-->Toolbars
    4.Taskbar and Start menu properties launches.
    5.Select the checkbox of Access connection
    6.AC toolbar will be added in the Task bar
    • Make sure AC Toolbar is available in all the user account.
    Stand alone
    A
    A
    1.Launch AC in administrator account.2.Click on "Tools"-->click on global settings.
    3.Click Network and Uncheck the "Allow Window users without administrator privileges to create and apply location profiles" option.
    4.Click OK to close and exit the window.
    5.Log into the user account -->Launch AC.
    6.Connect button should be grayed out in the AC toolbar for the ethernet ,wireless lan,wireless wwan and WiMAX profiles.

    Note:For modem profile connect/disconnect options works in the user mode.
    • Make sure connect button is grayed out in the AC toolbar for the ethernet ,wireless lan,wireless wwan and WiMAX profiles.
    Stand alone
    A
    A
    OTHER DETAILS
    EUT Quantity : safd 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
    2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
    (All Test Activity should be performed with AMT Enabled) QcTray Verification Test (While doing JP coverage, verify the japanese characters, error messages and help menu contents)
    Test Item Configuration Result
    Win XP
    Win 7
    1. QcTray Verification Standalone / Docking station
    2. AC Status Icon (ACWLIcon) Verification Standalone / Docking station

    TEMS Reviewer Log:
    Review Logs
    Keywords:   None
    Requirements :   None
    Attached files :

    Update History:
    This document is not yet modified.