Test Case

Show / Hide direct link   <ROOT> 3037PA: WWAN [Wireless Wide Area Network] Function Test - PP-80379



Version 3.5
Created on 15/03/2005 19:23:50  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Test Coverage
Lessons Learned:No Phase:SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify the Wide Area Network functions using ThinkPad
CRITERIA
All WAN functions must work as expected
No functional error, system performance degradation.
EUT QUANTITY
Two Systems.
EQUIPMENT
Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
During FVT following test items needs to be covered. However based on the product schedule / change information and single phase, where no SIV is there, then test items will be decided based on the strategy at that time.

1. WWAN driver installation and basic function test
2. Basic WWAN profile connectivity / PM scenerio

REFERENCE PROCEDURE


STATISTIC INFO
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.


OTHER DETAILS
EUT Quantity : Two Systems. 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)

Note :

  1. Functions mentioned here are subject to the support by the carrier provider or the simulator.
  2. Testcase will be updated once the formal testing is done with the correct level of driver and utility.
  3. If any updates required to the testcase, inform the testcase owner/Lenovo engineers.

TEMS Reviewer Log:09/14/2009 09:50:20 PM by Kazuo 1 Matsumoto/LENOVO (Review Comment: My review was done - pls set review cycle for original 3 test cases
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.