Test Case

Show / Hide direct link   <MAIN> 3200PA: UST - Wireless Profile swtiching/roaming verification - PP-80418



Version 1.1
Created on 25/01/2006 19:02:43  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify all the authentications including user scenerio
CRITERIA
Successful authentications
No system malfunction/performance degradation
EUT QUANTITY
Two systems
EQUIPMENT
PA Networking facilities.
Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin7- 64bitWin7- 32bit
1 Basic Profile Connectivity AAAA
2 Profile Switching AAAA
3 Profile Roaming AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Create Access Connection profiles for all the authentications mentioned below in your client system and check profile switching and roaming combinations

For Vista Support: The following are not yet supported: EAPTTLS, EAPFAST, LEAP, PEAP-GTC

1. ATS should cover Suspend/Resume and Hibernation Resume scenerio for the following Profiles
Details
Configuration
Check Item / Criteria WinXP Win 732 Win 764
Admin Mode
User Mode
Admin Mode
User Mode
Admin Mode
User Mode
Basic Profile Conectivity

- Include Suspend/Resume and Hibernation/Resume
Standalone
- No Error Message shall appear from AC
- Authentication and NW connection shall be successfull
128 bit WEP
-same as above-
LEAP-WEP with Saved username/password
-same as above-
NA
NA
NA
NA
LEAP-TKIP-CCKM with Auto Prompt for username/password
-same as above-
NA
NA
NA
NA
EAP-FAST-CKIP with Manual Prompt for username/password
-same as above-
NA
NA
NA
NA
EAP-FAST-AES-CCKM with SSO
-same as above-
NA
NA
NA
NA
WPA-PSK-TKIP with ASCII
-same as above-
WPA2-PSK-AES with Hex in windows zero config
-same as above-
PEAP-GTC-WEP with Saved username/password
-same as above-
NA
NA
NA
NA
WPA-PEAP-GTC-TKIP with One Time Token
-same as above-
NA
NA
NA
NA
WPA2-PEAP-GTC-AES with prompt for username/password
-same as above-
NA
NA
NA
NA
EAP-TTLS-CKIP with prompt for username/password
-same as above-
NA
NA
NA
NA
WPA2-EAP-TTLS-AES with SSO
-same as above-
NA
NA
NA
NA
PEAP-CHAP-WEP with Saved username/password
-same as above-
WPA-PEAP-CHAP-TKIP with windows zero config
-same as above-
EAPTLSCKIP with AC
-same as above-
WPA-TLS-TKIP with windows zero config
-same as above-
WPA2-TLS-AES with AC
-same as above-
Profile Switching <Combinations to be verified >
Standalone
-same as above-
LEAPWEP --> EAP-FAST-CKIP
Do switching between profiles and vice versa
NA
NA
NA
NA
LEAPWEP --> WPA-PSK-TKIP
Do switching between profiles and vice versa
LEAPWEP --> WPA2-PEAP-GTC-AES
Do switching between profiles and vice versa
NA
NA
NA
NA
LEAP-TKIP-CCKM --> EAP-TTLS-CKIP
Do switching between profiles and vice versa
NA
NA
NA
NA
LEAP-TKIP-CCKM --> PEAP-CHAP-WEP
Do switching between profiles and vice versa
LEAP-TKIP-CCKM --> WPA-TLS-TKIP with windows zero config
Do switching between profiles and vice versa
EAP-FAST-CKIP --> WPA2-PSK-AES
Do switching between profiles and vice versa
EAP-FAST-CKIP --> PEAP-GTC-WEP
Do switching between profiles and vice versa
EAP-FAST-CKIP --> WPA2-EAP-TTLS-AES
Do switching between profiles and vice versa
EAP-FAST-AES-CCKM --> WPA-PEAP-CHAP-TKIP with windows zero config
Do switching between profiles and vice versa
EAP-FAST-AES-CCKM --> WPA2-TLS-AES with AC
Do switching between profiles and vice versa
WPA2-PSK-AES with zero config --> PEAP-GTC-WEP
Do switching between profiles and vice versa
WPA2-PSK-AES with zero config --> EAP-TTLS-CKIP
Do switching between profiles and vice versa
WPA2-PSK-AES with zero config --> WEP
Do switching between profiles and vice versa
WPA-PSK-TKIP --> WPA-PEAP-CHAP-TKIP with windows zero config
Do switching between profiles and vice versa
WPA-PSK-TKIP --> EAPTLSCKIP
Do switching between profiles and vice versa
PEAP-GTC-WEP --> WPA2-EAP-TTLS-AES
Do switching between profiles and vice versa
NA
NA
NA
NA
WPA-PEAP-GTC-TKIP --> PEAP-CHAP-WEP
Do switching between profiles and vice versa
WPA2-PEAP-GTC-AES --> WPA-TLS-TKIP with windows zero config
Do switching between profiles and vice versa
WPA-PEAP-GTC-TKIP --> WPA2-TLS-AES with AC
Do switching between profiles and vice versa
EAP-TTLS-CKIP --> WPA-PEAP-CHAP-TKIP with windows zero config
Do switching between profiles and vice versa
WPA2-EAP-TTLS-AES --> EAPTLSCKIP
Do switching between profiles and vice versa
WPA-PEAP-CHAP-TKIP with windows zero config --> WPA-TLS-TKIP with windows zero config
Do switching between profiles and vice versa
Profile Roaming <Combinations to be verified >
Check Roaming Function by
- Restart
- Logoff
- PowerOff Access Point
- Power Management (sus/res, hib/res)
Standalone
- No Error Message shall appear from AC
- Authentication and NW connection shall be successfull
LEAPWEP --> EAP-FAST-CKIP
Do roaming between profiles and vice versa
NA
NA
NA
NA
LEAPWEP --> WPA-PSK-TKIP
Do roaming between profiles and vice versa
LEAPWEP --> WPA2-PEAP-GTC-AES
Do roaming between profiles and vice versa
NA
NA
NA
NA
LEAP-TKIP-CCKM --> EAP-TTLS-CKIP
Do roaming between profiles and vice versa
NA
NA
NA
NA
LEAP-TKIP-CCKM --> PEAP-CHAP-WEP
Do roaming between profiles and vice versa
LEAP-TKIP-CCKM --> WPA-TLS-TKIP with windows zero config
Do roaming between profiles and vice versa
EAP-FAST-CKIP --> WPA2-PSK-AES
Do roaming between profiles and vice versa
EAP-FAST-CKIP --> PEAP-GTC-WEP
Do roaming between profiles and vice versa
NA
NA
NA
NA
EAP-FAST-CKIP --> WPA2-EAP-TTLS-AES
Do roaming between profiles and vice versa
NA
NA
NA
NA
EAP-FAST-AES-CCKM --> WPA-PEAP-CHAP-TKIP with windows zero config
Do roaming between profiles and vice versa
EAP-FAST-AES-CCKM --> WPA2-TLS-AES with AC
Do roaming between profiles and vice versa
WPA2-PSK-AES with zero config --> PEAP-GTC-WEP
Do roaming between profiles and vice versa
WPA2-PSK-AES with zero config --> EAP-TTLS-CKIP
Do roaming between profiles and vice versa
WPA-PSK-TKIP --> WPA-PEAP-CHAP-TKIP with windows zero config
Do roaming between profiles and vice versa
WPA-PSK-TKIP --> EAPTLSCKIP
Do roaming between profiles and vice versa
PEAP-GTC-WEP --> WPA2-EAP-TTLS-AES
Do roaming between profiles and vice versa
NA
NA
NA
NA
WPA-PEAP-GTC-TKIP --> PEAP-CHAP-WEP
Do roaming between profiles and vice versa
WPA2-PEAP-GTC-AES --> WPA-TLS-TKIP with windows zero config
Do roaming between profiles and vice versa
WPA-PEAP-GTC-TKIP --> WPA2-TLS-AES with AC
Do roaming between profiles and vice versa
EAP-TTLS-CKIP --> WPA-PEAP-CHAP-TKIP with windows zero config
Do roaming between profiles and vice versa
WPA2-EAP-TTLS-AES --> EAPTLSCKIP
Do roaming between profiles and vice versa
WPA-PEAP-CHAP-TKIP with windows zero config --> WPA-TLS-TKIP with windows zero config
Do roaming between profiles and vice versa


OTHER DETAILS
EUT Quantity : Two systems 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled) Note :
1. Perform the test in User mode as well as Administrator mode
2. Please check the version of Access Connection to be used for each product. Access Connection may require specific version of device driver to be installed for the adapters to be tested.
3. Refer latest Access Connection Function specification for the feature support.

Perform Access Connection on Japanese OS for SIT for the final verification. Initial stages of testing can be performed on US version. While doing JP coverage, verify the japanese characters, error messages and help menu contents.

Access Connections applications may have other functions/GUI not mentioned in this test case. Please verify all the available functions and GUI that comes with the particular version of Access Connections. Any updation required to the test case, Please inform Lenovo Engineers.



Known Limitations/Restrictions/Information
Known Limitations
Restriction
1. Even "Allow all users of this system to create and apply loation profiles" Global settings option check box is checked, limited user account can not modify or create the setting for TCP/IP settings or security settings of local driver share, firewall settings due to Widnows security protection. Such setting is used with Windows default settings. Default is not checked.
2. Global settings can be only modified by the user when the logon privilege is administrator privilege.
3. The global settings option "Disable Adhoc connection type option in wireless LAN profiles" is not applicable, if the user create the profile using WIndows wireless LAN property window.
4. Profile disconnects when user change wireless security type of 802.1x peap to LEAP or vice versa
(Reference: ECR112851, W7:Profile disconnect when change wireless security type of 802.1x)

Information
1. When "Allow all users of this system to create and apply loation profiles" check box is checked, it allows user to create the location profiles and enables location switching regardless of the windows logon privilege (administrator or limited users).
2. Wireless profiles will be listed in the upper part of the profile list and the Ethernet profiles will be displayed at the lower part of the location profile list on "Automatic switching profile priority window". Due to the faster speed, the Ethernet profiles have higher priority than the wireless profiles.
3. Static IP address wireless profile will be listed in automtic location switching, as per the new design. However, static IP address ethernet profile will not be listed in automatic location switching.


Test Result Summary

Test Item
Check Item / Criteria
Configuration
Result
Win XP
Win 2K
Win V32
Win V64
1. Basic Profile Connectivity (AC and zero config profiles) - No Error Message shall appear from AC
- Authentication and NW connection
shall be successfull
Stand alone
A
A
A
A
2. Wireless Profile Switching Combination (AC and zero
config profiles)
- No Error Message shall appear from AC
- Authentication and NW connection
shall be successfull
Stand alone
A
A
A
A
3. Wireless Roaming Combination (AC and zero config
profiles)
- No Error Message shall appear from AC
- Authentication and NW connection
shall be successfull
Stand alone
A
A
A
A
4. User Scenario Test - No Error Message shall appear from AC
- Authentication and NW connection
shall be successfull
Stand alone
A
A
A
A

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.