Test Case

Show / Hide direct link   <MAIN> 3634PA: System defense Test - PP-80446



Version 1.2
Created on 02/03/2007 16:59:23  by Imthias Subaier
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:SIV (BBFV), SIT, SVT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To confirm the reliability of AMT
CRITERIA
Confirm Management policies from Landesk are working with Intel AMT devices
EUT QUANTITY
1 system
EQUIPMENT
Network
Critical Attribute:[0] : ETN - Ethernet

CONFIGURATION
REFERENCE PROCEDURE
Refer Detail Section
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-32bitWin10-64bitWin7- 64bitWin7- 32bit
1 Set up a System Defense configuration AAAAAA
2 Test a System Defense feature AAAAAA
3 Using 32-bit Console to verify System Defence AAAAAA
4 System Defence Feature Test through Wireless AAAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Set up a System Defense configuration

1. Open the LSM console (Start | All Programs | LANDesk | LANDesk System Manager) and click Hardware configuration.
2. In the console that opens, click AMT | System Defense.
NOTE: The System Defense policies page lets you apply System Defense policies to the Intel AMT devices you have targeted. The System Defense remediation pages lets you restore network access to devices whose traffic filter has tripped an applied policy and are currently quarantined. To test this feature, target a device and apply the ?BlockFtpSrvr? policy to it.

3. Click Policies and right-click target AMT device from All devices list. Click Target and verify the AMT device is lised in Target devices tab.

4. Click AMT tab and select BlockFtpSrvr as policy. Check Targeted devices (1 Devices) and click Apply.

5. "AMT System Defense policies configuration completed successfully." message is displayed. Click OK.


Test a System Defense feature

6. On that AMTdevice, open a command prompt window and enter ping –t <core server address>. Open a second command prompt window and enter ftp <core server address>. This should trigger the SD policy and send an alert to the core server, which can be seen in the LSM alert log (click Log in the LSM console). Double-click the alert to see a detailed description. The pings should also stop responding. To resolve the issue, click AMT | System Defense | Remediation in the LSM console, select the computer, and click Apply. The pings should now resume.



Using 32-bit Console to verify System Defence [UR-1916 / 1905]

Step 1:Setup a System Defence configuration
  1. Open the LDSM console (Start | All Programs | LANDesk | LANDesk Management Suite).
  2. Right click on the target device on the device list. Select Intel vPro System Defence Policies.
  3. Select BlockFtpSrvr and hit Set Policy.

Step 2:Test a System Defence feature
  1. On that AMTdevice, open a command prompt window and enter ping –t <core server address>. Open a command prompt window in the core server and enter ftp <client address>. This should trigger the SD policy and send an alert to the core server, which can be seen in the LSM alert log (click Log in the LSM console). Double-click the alert to see a detailed description. The pings should also stop responding.
  2. To resolve the issue, click AMT | System Defense | Remediation in the LSM console, select the computer, and click Apply. The pings should now resume.
  3. To remove the policy, Right click on the target device on the device list. Select Intel vPro System Defence Policies. Select RemoveAllPolicy and hit Set Policy.

System Defence Feature Test through Wireless:

Apply the System Defense policy to the wireless adapter, in addition to the wired adapter.


OTHER DETAILS
EUT Quantity : 1 system 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
Test Item XP V32 V64

TEMS Reviewer Log:03/05/2007 10:31:48 AM by Kazuo 1 Matsumoto/Japan/Lenovo/IDE (Review Comment: OK
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.