Test Case

Show / Hide direct link   <MAIN> 3995PA: AMT Function verification - Without LANDesk Application - PP-80488



Version 1
Created on 02/09/2009 14:34:04  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify the AMT functions without LANDesk application
CRITERIA
All AMT related function should work without any functional error
EUT QUANTITY
One system
EQUIPMENT
PPA networking facilities
Critical Attribute:[0] : ETN - Ethernet

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bitWin7- 64bitWin7- 32bit
1 AMT in Small Business Mode AAAA
2 Intel AMT credentials from WebUI AAAA
3 AMT 6.0 - Intel Management & Security Status Task Tray Verification AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.


AMT Test Case without Landesk


I Setting up configuring and managing Intel AMT devices by Small Business mode



1.On the Intel AMT device, start the ME BIOS (press Ctrl-P as the device boots). This should be near the end of POST. If you have never configured the device, enter the default password "admin". Change the password - this is required. Use "iAMT-7.0" so that everyone share the same password for our test.



2. Intel(R) AMT Configuration I Network Setup I Intel ME Network Name Settings

3. If the device has been previously managed or its previous state is unknown, then fully un-provision it.

4. Enter the Host Name and Domain Name.

5. Go Back to Intel AMT Configuration Menu and Activate Network Access .

Wireless setup for AMT client machine [UR-19200

1. Configure an Access Point with the following rules and connect it to the LANDesk network by adding Static IP

Supported encryption: WPA-PSK and TKIP/CKIP
When you set wireless security, the pass phrase must meet following rule.
PassPhrase 8 to 63-character passphrase.
Contains 7-bit ASCII characters, in the range of 32-126, excluding ?:?, ?,? and ??? characters.

Limitations:

Passphrase Complexity: Passphrase must include:

a. At least one Digit character ("0", "1",?"9")

b. At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. "!", "$", ";"). Note that ?_? is considered alphanumeric.

c. Both lower-case Latin ("a", "b",?,"z") and upper case Latin ("A", "B",?"Z").


2. AMT client machine setup

Supported card: Intel Wireless cards
Make sure latest EPROM and latest driver has ben updated for Intel WL card

3. Wireless setting configuration for AMT client


Need to set the wireless setting of AMT client in wired condition through webUI using the following URL
http://<machine>:16992 in small business mode
username: admin
password: AMT client password


Make sure Wireless management is enabled
Configure the wireless settings by creating a new profile with SSID, encryption and passphrase as configured in Access point
Save the settings and close the window

Disconnect the wired connection with the AMT client machine

4. Wireless connectivity from client

Create/apply wireless profile with SSID, encryption and passphrase as configured in Access point through windows Zero configuration

Run the inventory in both client and in server. IP address of the client machine will change in server

The AMT client wireless configuration is successfull




AMT - Change the Intel AMT credentials from WebUI

1. Configure the AMT in target system and connect it to a network.
2. From another system in the network, type in http://<machine IP>:16992 in Internet explorer to access AMT WebUI.
3. When prompted, enter username and password ( admin:iAMT-6.0)
4. Click on User Account -> Change Admin..


5. Enter new User name and Password and click on Submit. Make sure the password entered fulfilsl the minimum requirements.


6. Internet explorer will immediately prompt for the new Username and password. Enter the new username and password and make sure login is successful.

AMT 6.0 - Intel Management & Security Status Task Tray Verification -

Check Item / Criteria
Result
Test Item
Configuration
Win XP
Win 7
Win 8
1. Install Intel AMT 6.0 - Management Engine Interface driver and
Intel AMT 6.0 - Local Manageability Service and Serial Over
LAN driver and restart.
2. From the system tray click on the Intel Management & Security
Status Task Tray icon. Select Open. Confirm that the Intel
Management & Security Status application is launched properly
  • Make sure no Installation error appears and installation completes successfully.
  • Intel Management & Security Status application should launch properly. No error message should appear.
Standalone
A
A
A
1. From the system tray click on the Intel Management & Security Status Task Tray icon. Select Exit.
2. Confirm that the Intel Management & Security Status application
is closed properly
  • Intel Management & Security Status application should exit properly. No error message should appear.
A
A
A
General Tab
1. Launch Intel Management & Security Status window by double
clicking Intel Management & Security Status Task Tray icon.
2. Click General tab.
3. Confirm that all information is displayed correctly.
4. Check the Service Status for Intel Active Management
Technology (Intel AMT). It should be same as the status in ME
BIOS (press Ctrl-P as the device boots)
5. Check "Intel Management and Security Status will be available
next time I log on to Windows" option. Intel Management and
Security Status task tray icon should be available when you log
on to windows next time.
6. Uncheck "Intel Management and Security Status will be available
next time I log on to Windows" option. Intel Management and
Security Status task tray icon should not be available when you
log on to windows next time.
7. Check that "Enable User Notification Pop-Up" option is available
and it functions properly.

  • Service Status for Intel Active Management Technology (Intel AMT) should display Configured if it is Configured in ME BIOS.
  • Service Status for Intel Active Management Technology (Intel AMT) should display Unconfigured if it is not configured in ME BIOS.
Standalone
A
A
A
Intel AMT Tab
1. Launch Intel Management & Security Status window by double
clicking Intel Management & Security Status Task Tray icon.
2. Click Intel AMT tab.
3. Confirm that the following options are available and display
correct information:
(i) Fast Call for help Connected/Disconnected

(ii) Support session status
-------------------------------------
(a) Remote Control Connection
(b) Disconnected hot key
(c) Media Redirection
(d) Terminal and Keyboard Redirection

(iii) System Defense
------------------------------------
(a) Status Activated / Not activated /Info Unavailable




? Remote Control Connection
Indicates whether there is any open KVM (Keyboard, Video & Mouse) Remote Control session (Connected / Disconnected / Information unavailable) .
Click the Stop Session button to close and open Remote control session.

? Disconnection hot key
Indicates what is the hot key used to close an open KVM (Keyboard, Video, Mouse) Remote Control session (default is Shift+Esc).
Click on the Change button to choose a different hot key for terminating an open KVM Remote control session

? Media Redirection
Indicates whether there are any open IDE redirection sessions. Possible values: Connected/ Disconnected/ Information unavailable

?Terminal/Keyboard Redirection
Indicates whether there are any open terminal/keyboard redirection sessions. Possible values: Connected/ Disconnected/ Information unavailable.

. System Defense State
Indicates whether System Defense is currently active. Possible values: Activated/Not activated/ Information unavailable.
Standalone
A
A
A
Advanced Tab

1. Launch Intel Management & Security Status window by double
clicking Intel Management & Security Status Task Tray icon.

2. Click Advanced Tab.

3. Confirm that the following options are available and display
correct information:
(i) Intel Management Engine
------------------------------------------
(a) Status Configured / Unconfigured
(b) Firmware Version 6.0.0.xxxx

(ii) Secure Output Window Settings
-------------------------------------
(a) Message Language
(b) Message Size

(iii) Network Information
-----------------------------------
(iv) Extended System Details


4. Click Network Information button. Intel AMT Network Information
Popup window will appear. It should display correct information
for both Wireless and Wired Connection.

(i) IPv4 Mode
(ii) MAC Information
(iii) Link Status
(iv) IP Information









5. Click Extended System Details button. Popup window should
appear and the following information should be displayed:
(a) Intel MEI Driver
(b) LMS
(c) Power Policy
(d) Last Intel ME Reset Reason
(e) System UUID


? State
The operational status of Intel? ME Possible values: Configured / Unconfigured / Information unavailable.

? Firmware Version
The Intel? ME firmware version.


? Message Language
Specifies the language used by the Secure Output feature. Choose one of the following: English, French ,German, Chinese (traditional), Japanese

?Message Size
Specifies the font size of messages displayed by Secure Output Feature. Choose one of the following: Regular or Large



IPv4 Mode
Possible values: Static/DHCP/Information unavailable.

?MAC Information
XX:XX:XX:XX:XX:XX ? e.g. 88:88:88:0A:88:87

?Link Status
Whether the link is currently active. Possible values are: Link up/Link down/Information unavailable

?IP Information
X.X.X.X ? e.g. 10.102.0.1

? Intel? MEI Driver
The version of the Intel? Manageability Engine Interface driver.

?LMS
The version of the LMS service.

?Power Policy
The power policy which is currently in effect. States are: ON in S0, or any other power policy supported by the system.

?Last Intel? ME Reset Reason
Displays the reason that the Intel? ME was last reset. Possible values: Global System / FW reset / Power Up / Unknown cause / Information unavailable

?System UUID
The current System Unique Universal Identification. Standard System UUID presentation, such as, 03000200-0400-0500-0006-000700080009.
A
A
A






OTHER DETAILS
EUT Quantity : One system 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.