Test Case

Show / Hide direct link   <MAIN> 4000PA: FVT Test Case : Network Team - - PP-80492



Version 1
Created on 02/09/2009 14:40:37  by Muralidharan Seshadri
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:a
CRITERIA
a
EUT QUANTITY
a
EQUIPMENT
a
Critical Attribute:[0] : ETN - Ethernet

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1 Full Result AA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
EUT Quantity : a 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
Test Items
Must
Minor
Full
Results
Remarks
Chg
1. Installation
XP Vista
Win 7
1.1 Clean install
X
PASS
1.2 From previous driver
X
PASS
1.3 From current driver
X
N/A
1.4 Silent install X
PASS
2. Online Mode
2.1 Wireless Radio On/Off
2.1.a Global switch
2.1.b Fn+F5
X
PASS
2.2 WWAN Device Power On/Off (using utility)
X
N/A
2.3 LED
The link "Database 'WWAN Development', View '??????', Document 'LED Indication Test'" has been extracted

The link "Database 'WWAN Development', View '??????', Document 'LED behavior'" has been extracted

2.3.a OFF (Disabled)
2.3.b SLOW BLINK (No Service)
2.3.c STEADY ON (Ready to Connect-Service Detected)
2.3.d INTERMITTENT (Transmitting/Receiving)
X
PASS
2.4 Standby/Resume
2.4.a While connected
2.4.b While disconnected
2.5.c After turning radio off
X
PASS
2.5 Hibernate/Resume
2.5.a While connected
2.5.b While disconnected
2.5.c After turning radio off
X
PASS
2.6 Idle test
X
-
3. Offline Mode
3.1. Suspend/Resume Fn+F4 with XXXX open/close
3.1.a Device Powered up
3.1.b Device Powered down
X
PASS
3.2. Timer Suspend/Resume with XXXX open/close (x10)
3.2.a Device Powered up
3.2.b Device Powered down
3.3. Hibernate/Resume with XXXX open/close (x5)
3.3.a Device Powered up
3.3.b Device Powered down
X
PASS
3.4. Timer Hibernate/Resume with XXXX open/close (x10)
3.4.a Device Powered up
-
3.5 Successive ON/OFF of global switch(x10)
3.6 Power Manager and Intel C3/C5 Residency
The link "Database 'Wireless LAN Related Document', View '????(A)', Document 'Power Management Test for WWAN Devices (Tosa, Akita, Karafuto)'" has been extracted

The link "Database 'Wireless LAN Related Document', View '????(A)', Document 'Intel C3 Residency Monitor'" has been extracted
X
3.7 Device Availability through Fn+F5
X
PASS
4. GPS
4.1 Satellite fix -
-
-
5. Windchill





Test Items
Must
Minor
Full
Results
Remarks
Chg
732
764
R1D06
0. Installation/Uninstallation
0.1 Clean install using SETUP.EXE
X
PASS
PASS
0.2 Update install (from previous driver)
X
PASS
PASS
Scenarios tested:
* QS4.0 -> QS4.4 = PASS
* QS4.3 -> QS4.4 = PASS
0.3 Overwrite install
PASS
PASS
0.4 Add/Remove program Uninstallation
X
PASS
PASS
0.5 Silent install
X
PASS
PASS
0.6 SETUP.EXE Uninstallation
PASS
PASS
0.7 XML2
BRL
0.8 Preload module unit test (testmod2)
Preload Module: N/A
732
764
No card
Other card
Drever

1. LED State Indication
The link "Database 'WWAN Development', View '??????', Document 'LED behavior'" has been extracted
1.1 OFF (Disabled)
PASS
PASS
1.2 SLOW BLINK (No Service)
PASS
PASS
1.3 STEADY ON (Ready to connect/Service detected)
PASS
PASS
1.4 INTERMITTENT (Transmitting/Receiving)
PASS
PASS
2. Connection
Vodafone Spain
(Roaming)
Softbank
(Home)
2.1 Connect/disconnect (x5)
PASS
PASS
2.2 Wireless Radio On/Off (x5)
2.2.a Using Fn+F5
2.2.b Using Access Connections
2.2.c Using other utility
X

PASS
PASS
-

PASS
PASS
-
2.3 Standby/Resume (x5)
2.3.a While connected
2.3.b While disconnected
X

PASS
PASS

PASS
PASS
2.4 Hibernate/Resume (x5)
2.4.a While connected
2.4.b While disconnected

PASS
PASS

PASS
PASS
2.5 Global switch on/off (x5)
2.5.a While connected
2.5.b While disconnected
X

PASS
PASS

PASS*
PASS*
SIM not activated or out of coverage area message appears when quickly connecting after GS off/on
- Fail 1/5
- Also happens in previous drivers
3. Power Management
3.1 Suspend/Resume Fn+F4 (x5)
3.1.a Wireless Radio On
3.1.b Wireless Radio Off
X

PASS
PASS

PASS
PASS
3.2 Hibernate/Resume (x5)
3.2.a Wireless Radio On
3.2.b Wireless Radio Off
X

PASS
PASS

PASS
PASS
3.3 Restart/Resume (x5)
3.3.a Wireless Radio On
3.3.b Wireless Radio Off

PASS
PASS

PASS
PASS
3.4 Shutdown/Resume (x5)
3.4.a Wireless Radio On
3.4.b Wireless Radio Off

PASS
PASS

PASS
PASS
3.5 Successive ON/OFF of global switch (x10)
3.5.a Ends at GS ON
3.5.b Ends at GS OFF
X
PASS
PASS
3.7 Device availability through Fn+F5
3.7.a Wireless Radio On
3.7.b Wireless Radio Off

PASS
PASS

PASS
PASS
3.8 Power Test (Vista)
The link "Database 'Wireless LAN Related Document', View '????(A)', Document 'How to use Power Test tool for Vista MS Compliance'" has been extracted

The link "Database 'MS LOGO', View 'Status by Date', Document 'Power Management Test Utilities for Windows Vista'" has been extracted

3.8.a Suspend/resume (S3)
3.8.b Hibernate/resume (S4)
X
Condition:
Make sure wireless radio is off first. This is the default WWAN radio setting during preload.
4. GPS
SIM required
4.1 Standby/Resume (x5)
4.1.a Tracking is started
4.1.b Tracking is stopped
X

FAIL
FAIL

PASS
PASS
4.2 Hibernate/Resume (x5) 4.2.a Tracking is started
4.2.b Tracking is stopped
X

FAIL
FAIL

PASS
FAIL
4.3 Global switch on/off (x5) 4.3.a Tracking is started
4.3.b Tracking is stopped

PASS
FAIL

PASS
FAIL
5. WLK test
The link "Database 'Elpis Development', View 'All Documents', Document 'WLK1.4 Status as of 11/10'" has been extracted

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.