Test Case

Show / Hide direct link   <ROOT> 4077PA: FVT: GPS application verification test - PP-80431



Version 1.2
Created on 02/02/2010 16:36:37  by PSI_PA_NW_Japan
Last modified on  27/10/2015 17:40:22  by y_amenomiya
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Test Coverage
Lessons Learned:No Phase:FVT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify the basic functionality of GPS application and LMBC [if available during FVT]
CRITERIA
Successful GPS connectivity
EUT QUANTITY
One system
EQUIPMENT
PA Networking facilities with necessary supported SIM cards
Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-32bitWin10-64bitWin7- 64bitWin7- 32bit
1 Installation AAAAAA
2 AAAAAA
3 Main GUI AAAAAA
4 GPS Options AAAAAA
5 Help menu AAAAAA
6 GPS functionality with Power Management AAAAAA
7 ThinkVantage Maps AAAAAA
8 GPS SIM Security Function Verification (applicable only for Ericsson WWAN cards) AAAAAA
9 GPS with Wireless WAN Device behavior in Device Manager AAAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Known Limitations/Restriction/Information
Known Limitations
1. XTRA data failed to be downloaded in MC7770 using ThinkVantage GPS. The API ForceXTRADownload would return success but GetXTRAValidity API shows that there was no XTRA data downloaded.
Ref: ECR98868, Gobi4000: Failed to Download XTRA data using ForceXTRADownload API

2. GPS is acquiring speed even when tracking on stationary mode
Ref: ECR111625, GPS Enabler is acquiring speed while stationary with Eric H5321gw
Restriction
Information
1. GPS 2.80 supports for Sierra MC7770 and Ericsson H5321gw, Bing Maps API v7.0
2. In GPS 2.80, GPS Mode option is removed based on TVT SW Function Spec: TVT GPS v2.80, pages 3 and 6.


Installation
Test Item
Check Item / Criteria
Win 8
Win7 32
Win7 64
Installation
0. Configure system with WWAN adapter.
1. Boot to OS. Login to Administrator account.
2. Install TVT GPS as per build letter.
3. Confirm TVT GPS was installed successfully.
- No error message should appear during or after installation.
- TVT GPS should not be installed if system is configured without WWAN card.
- All application shortcuts should be created:
- WXP, Vista: Desktop shortcut, Start menu shortcut
- Win7: Control Panel >> Network and Internet shortcut
- No desktop and Start menu shortcuts should be created on Windows 7.
- All shortcuts should launch TVT GPS without errors when clicked.
- An entry for TVT GPS should be created on Add/Remove Programs (or equivalent, depends on the OS).
- Confirm application launches without errors.
Uninstallation
1. Boot to OS. Login to Administrator account.
2. Go to Add/Remove Programs (or equivalent, depends on the OS).
3. Select TVT GPS and uninstall.
- No error message should appear during or after uninstallation.
- TVT GPS components should be uninstalled completely.
Overwrite/Upgrade Installation
0. Configure system with WWAN adapter.
1. Boot to OS. Login to Administrator account.
2. Install TVT GPS as per build letter.
3. Confirm TVT GPS was installed successfully.
4. Again install the same build of TVT GPS .
5. Installshield Wizard - Program Maintenance should be shown with the following options: Modify, Repair, Remove.
- No error message should appear during or after installation.
- Confirm all Program Maintenance options works as expected: Modify, Repair, Remove.
- Confirm application launches without errors.
User Mode
Perform Installation, Uninstallation, Overwrite and Upgrade installation as mentioned above for TVT GPS with in User account with and without Administrator privilege.
- No error message should appear during or after installation with Admin privilege.
- Confirm application launches without errors.
- User should not be able to Install or Uninstall without Admin privilege.

Main GUI

Test Item
Check Item / Criteria
Win 8
Win7 32
Win7 64
GPS Main GUI
0. Configure system with WWAN adapter.
1. Boot to OS. Login to Administrator account.
2. Install TVT GPS as per build letter.
3. Launch TVT GPS .
- No error message should appear after launching TVT GPS .
- Confirm Main GUI is shown without garbage or graphic anomalies.
GPS Tracking
1. Launch TVT GPS.
2. Click on the Start button to begin Real Time Tracking.
3. Confirm system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
- No error message should appear after launching TVT GPS .
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
Close [X] Function of GPS Main GUI
When Tracking is Started

1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Confirm system obtains satellite fix successfully.
4. Click the Close [X] button.
5. GPS Main GUI should minimize on the task tray.

When Tracking is not Started

1. Launch TVT GPS
2. Click the Close [X] button.
3. GPS Main GUI should close.
- No error message should appear after launching TVT GPS .
- No error message should appear after pressing the Close [X] button.
- Confirm Close [X] button function should work as expected.
GPS Options
1. Launch TVT GPS
2. Click on the Options button to launch GPS Options window.
- No error message should appear after launching TVT GPS .
- No error message should appear after launching the GPS options window.

GPS Options

Test Item
Check Item / Criteria
Win 8
Win7 32
Win7 64
GPS Modes
1. Select the each of the following modes and confirm it"s functionality:
- Standard: default option
- EXTRA: time of the satellite fix can be much faster than standard GPS, especially until the latest satellite data is not stored in WAN card.
- A-GPS: By downloading assistance data from A-GPS servers which mobile broadband carriers operate, time of the satellite fix can be much faster than standard GPS. The accuracy of the satellite fix by A-GPS is better than EXTRA.


Note: In GPS 2.80, GPS Mode option is removed based on TVT SW Function Spec: TVT GPS v2.80, pages 3 and 6.

GPS 2.80 :

XTRA? can be selected for Gobi 2000 / 3000 / MC7770. If ?XTRA? is selected, ?Details? button becomes enabled and users can configure XTRA settings.

"A-GPS" appears when setting A-GPS value to "1" in the registry. (A-GPS is not formally supported)
- Confirm the selected modes work as described without errors.
- Confirm EXTRA and A-GPS modes are only available for Gobi 2000 cards.
- Confirm no system degredation occurs with selected modes.
- Confirm the functions work as expected.
GPS Mode: EXTRA >> Details

Details for XTRA

If ?XTRA? is selected in GPS Mode setting, the following dialog window appears by selecting ?Details? button.



1. Confirm the functionality of the following settings for EXTRA mode:
- Download Interval Time: determines interval time (hours) between XTRA downloads. The default value depends on WWAN card (range 1-999).
- Network Preference: sets the XTRA WWAN network preference. When automatic XTRA database downloading is enabled this preference determines which WWAN networks will be used to perform the XTRA database download. Options to be set are ?Any network?, ?Home only? and ?Roam only?.
- Download EXTRA data: forces the EXTRA database to be downloaded to the device when users want to use EXTRA data without waiting interval time.


Known Carrier:
The carriers registered in the WAN pre-defined profile (AC_wanprofiles.xml) are shown and if a carrier is selected, the corresponding Carrier name, APN, Authentication, User name and Password are automatically input.

Authentication, APN, User name, Password:
These settings are required to establish network with HSPA / UMTS carriers. Authentication can be selected from PAP and CHAP. If SIM for HSPA is removed, these setting are disabled

Validity Period of XTRA data:
?Starting Date? shows the starting date of validity period for downloaded assistant data and ?Validity Period? shows the validity period. When data is downloaded, data is not updated automatically. So, by selecting ?Refresh? button, these data is refreshed. These data cannot be shown when tracking is not started by XTRA mode.
- Confirm the following functions are available only for EXTRA mode.
- Confirm no system degredation occurs after setting the options.
- Confirm the functions work as expected.
Fix Interval Time
1. Confirm the functionality works as described:
This setting determines interval time (sec) to fix satellite. The default is 3 seconds (range 1-99).
- Confirm no system degredation occurs after setting the options.
- Confirm the functions work as expected without errors.
Units of Speed
1. Confirm the functionality works as described:
This option determines units of speed which is shown in GPS Enabler. Selectable values are mph (default), km/h, Knots.
- Confirm no system degredation occurs after setting the options.
- Confirm the functions work as expected without errors.
Auto Tracking
1. Confirm the functionality works as described:
When GPS applications open Gobi 2000 NMEA COM port, GPS tracking starts automatically.
- Confirm option is available only for Gobi 2000 cards.
- Confirm no system degredation occurs after setting the options.
- Confirm the functions work as expected without errors.
Show Warning
Confirm the functionality works as described:
1. When show warning is checked and you try to close [X] the GPS window while tracking started it should prompt a message like below.



2. If the Show warning checkbox is not checked then it will minimise to the taskbar.
- Confirm if functions work as expected.

Help menu

Test Item
Check Item / Criteria
Win 8
Win7 32
Win7 64
GPS Help menu
1. Launch TVT GPS
2. Click on the Help button [?] to launch GPS Help menu.
- No error message should appear after launching TVT GPS .
- No error message should appear after launching the GPS Help menu.
ThinkVantage Help
1. Confirm the funtionality works as described:
- ThinkVantage GPS Help file is opened. Also, The help file can be opened by F1 key.
- Confirm the functions work as expected without errors.
- Confirm the contents of the GPS Help file is accurate and should describe all the functions of TVT GPS .
- Confirm the GPS Help file launches upon pressing F1 key.
About ThinkVantage GPS
1. Confirm the funtionality works as described:
- The version information window is opened.
- Confirm the functions work as expected without errors.
- Confirm the contents of the version window is accurate.

GPS functionality with Power Management

Test Item
Check Item / Criteria
Win 8
Win7 32
Win7 64
Suspend
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Suspend the system.
6. Resume after 1 minute.
7. Real Time Tracking should start automatically.
8. Confirm current location is shown on ThinkVantage Maps.
9. Repeat steps 5-8 for 20 trials.
- No error message should appear before and after system Suspend and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
LID Close
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. LID close the system.
6. LID open to resume after 1 minute.
7. Real Time Tracking should start automatically.
8. Confirm current location is shown on ThinkVantage Maps.
9. Repeat steps 5-8 for 20 trials.
- No error message should appear before and after system LID close and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
Hibernate
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Hibernate the system.
6. Resume after 1 minute.
7. Real Time Tracking should start automatically.
8. Confirm current location is shown on ThinkVantage Maps.
9. Repeat steps 5-8 for 20 trials.
- No error message should appear before and after system Hibernate and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
Restart
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Restart the system. Boot to OS.
6. Launch TVT GPS .
7. Real Time Tracking should show not started.
8. Confirm current location is shown on ThinkVantage Maps.
9. Click on the Start button to begin Real Time Tracking.
10. Wait until system obtains satellite fix successfully.
11. Launch ThinkVantage Maps and check if current location is shown.
12. Repeat steps 5-11 for 20 trials.
- No error message should appear before and after system Restart and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
Shutdown
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Shutdown the system. Power on the system and boot to OS after 1 minute.
6. Launch TVT GPS .
7. Real Time Tracking should show not started.
8. Confirm current location is shown on ThinkVantage Maps.
9. Click on the Start button to begin Real Time Tracking.
10. Wait until system obtains satellite fix successfully.
11. Launch ThinkVantage Maps and check if current location is shown.
12. Repeat steps 5-11 for 20 trials.
- No error message should appear before and after system Shutdown and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.

Battery detached/attached [UR-03120AP] Win-8 Win-7 Win-7 64bit
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Hibernate the system.

6. Detach then attach the battery from the system.
7. Resume after 1 minute.
8. Real Time Tracking should start automatically.
9. Confirm current location is shown on ThinkVantage Maps.
10. Repeat steps 5-8 for 20 trials.
- No error message should appear before and after system Hibernate and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.
1. Launch TVT GPS .
2. Click on the Start button to begin Real Time Tracking.
3. Wait until system obtains satellite fix successfully.
4. Launch ThinkVantage Maps and check if current location is shown.
5. Shutdown the system.

6. Detach then attach the battery from the system.
7. Power on the system and boot to OS after 1 minute.
8. Launch TVT GPS .
9. Real Time Tracking should show not started.
10. Confirm current location is shown on ThinkVantage Maps.
11. Click on the Start button to begin Real Time Tracking.
12. Wait until system obtains satellite fix successfully.
13. Launch ThinkVantage Maps and check if current location is shown.
14. Repeat steps 5-11 for 20 trials.
- No error message should appear before and after system Shutdown and starting GPS tracking.
- No error message should appear while obtaining satellite fix.
- Confirm Satellite Information is shown correctly.
- Confirm all available satellites are represented on both the globe and signal bar.
- Confirm Status is shown correctly.
- Confirm ThinkVantage Maps can be launched with tracking started.
- Confirm current location is shown on ThinkVantage Maps.


ThinkVantage Maps

Test Item
Check Item / Criteria
Result
Win 8
Win7 32
Win7 64
Launching TVT Maps and correct GPS positioning
From TVT GPS Application:

1. Launch ThinkVantage GPS and connect to GPS satellite.
2. Confirm successful connection.
3. On ThinkVantage GPS Main GUI, click on ThinkVantage Maps button.
4. Confirm the ThinkVantage Maps application launches successfully without errors and shows the current location of the User.
5. On ThinkVantage GPS Main GUI, select a GPS application ThinkVantage Maps from the drop-down list box and click again [Launch].
6. Confirm that only one ThinkVantage Maps window should launch and shows the current location of the User.

From Control Panel:

7. Confirm successful connection.
8. Go to Control Panel > System and Security OR go to Control Panel > Network and Internet.
9. Under Lenovo"s GPS, click Open ThinkVantage Maps.
10. Confirm the ThinkVantage Maps application launches successfully without errors and shows the current location of the User.
- Confirm ThinkVantage Maps can be launched without errors.
- Confirm current location is shown on ThinkVantage Maps.
Launching TVT Maps without internet connection
From TVT GPS Application:

1. Install ThinkVantage GPS
2. Without internet connection launch TVT GPS application.
3. Start satellite tracking.
4. After getting satellite fix, launch ThinkVantage Maps from GPS application.
5. ThinkVantage Maps should launch successfully.

From Control Panel:

6. Install ThinkVantage GPS
7. Without internet connection, go to Control Panel > System and Security OR go to Control Panel > Network and Internet.
8. Under Lenovo"s GPS, click Launch ThinkVantage Maps link.
9. ThinkVantage Maps should launch successfully.
- ThinkVantage Maps should launch without errors
- The following message should not appear. "The system is not connected to the internet. Please make sure you are connected to internet and then launch the online maps application"
- "No network" information" should be shown on the taskbar.
Using Bing maps as default maps [UR-03276AP]
1 Launch Thinkvantage GPS and start tracking to get the satellite fix.
2. Confirm fix is obtained
3. On Thinkvantage GPS Main GUI, click on Thinkvantage Maps button.
4. Confirm the Thinkvantage Maps application launches succesfully and without errors and shows current location of the User.
5. On the Map style option, select Bing maps (Default is Google maps) and click Ok
6. Confirm the Bing Map launch successfully and without errors and shows correct location on the map.


- Confirm that Bing Maps launches successfully without any errors
- Confirm current location is shown on Bing Maps
Changing between Google maps and Bing maps

1. Launch ThinkVantage GPS and start tracking to get the satellite fix
2. Confirm Fix is obtained.

3. On ThinkVantage GPS Main GUI, click on ThinkVantage Maps button.
4. Confirm the ThinkVantage Maps application launches successfully without errors and shows the current location of the User.

5. Right click anywhere on the Thinkvantage map window, and select Option.
6. On the Map style option, select Bing Maps (Default is Google Maps) and click OK.
7. Make sure that Bing maps loads successfully without errors and shows the correct location on the map.

Options Setting


The Options dialog is opened from the system menu in ThinkVantage Maps. Map Style has 2 options of Google Maps and Bing Maps and user can switch map style of ThinkVantage Maps. Google Maps is default. The location (latitude / longitude) in the map is updated by the time that is defined in MAP Refresh Time (default: 5 sec). The map (html file) is refreshed by Refresh menu or F5 key. The marker can always be kept in the center of the map when "Keep marker (current location) centered on map" is selected (default is unchecked).
- ThinkVantage Maps should launch without errors
- Confirm current location is shown on ThinkVantage Maps.

GPS SIM Security Function Verification (applicable only for Ericsson WWAN cards)
Enable SIM security
1. Boot OS with activated SIM, WWAN adapter, GPS and Access Connection installed
2. Launch AC and Switch to Advance Mode. Goto Tools---> Mobile Broadband----> SIM ---> Enable SIM Security.
3. Confirm Enable SIM Security window appears successfully.
4. Input correct PIN. Click OK.
Unlock SIM (with correct PIN)
1. With SIM PIN enabled. Boot the system to OS.
2. Launch GPS. The following message would appear:
The SIM card is locked. Enter PIN to unlock.
3. Enter the correct PIN information and click OK.
4. Confirm GPS application launches properly and does not hang.
Unlock SIM (with incorrect PIN)
1. With SIM PIN enabled. Boot the system to OS.
2. Launch GPS. The following message would appear:
The SIM card is locked. Enter PIN to unlock.
3. Enter the incorrect PIN information and click OK.
4. Confirm the following message was shown:
Your PIN was not valid. Please enter correct PIN.
5. Also confirm the number of trials remaining. 3 trials is the maximum number of trials the User is allowed upon entering incorrect PIN information.
Block SIM
1. With SIM PIN enabled. Boot the system to OS.
2. Launch GPS. The following message would appear:
The SIM card is locked. Enter PIN to unlock.
3. Enter the incorrect PIN information and click OK.
4. Confirm the following message was shown:
Your PIN was not valid. Please enter correct PIN.
5. Repeat steps 3-4 for 2 more times.
6. Modify SIM Security window should be shown with the following message:
SIM card is blocked. Enter PUK to Unblock.
Unblock SIM (with correct PUK)
1. With SIM card blocked. Boot the system to OS.
2. Launch GPS. Modify SIM Security window should be shown with the following message:
SIM card is blocked. Enter PUK to Unblock.
4. Enter the correct PUK information, new PIN code and click OK.
5. Confirm GPS application launches properly and does not hang.

Note :If OS is Win7 and user privilege is not administrator mode, unblock function of Mobile Broadband API cannot work as API spec. So, the following indication message is shown so that users can unblock SIM.
"SIM card is blocked. To unblock SIM card, please run TvGpsApp.exe (in ThinkVantage GPS install folder) as administrator and click Start button to open Unblock SIM Card window."

Unblock SIM (with incorrect PUK)
1. With SIM card blocked. Boot the system to OS.
2. Launch GPS. Modify SIM Security window should be shown with the following message:
SIM card is blocked. Enter PUK to Unblock.
3. Enter the incorrect PUK information and click OK.
4. Confirm the following message was shown:
SIM card is blocked.
5. Also confirm the number of trials remaining. 10 trials is the maximum number of trials the User is allowed upon entering incorrect PUK information.


GPS with Wireless WAN Device behavior in Device Manager
Test Item
Criteria
Result
Win 8
Win 7
- Device Manager entry
- Check Basic WWAN connectivity
- Suspend and Resume
- Check Basic WWAN connectivity
- Launch GPS application and start the tracking
- Launch Google/Bing Maps
- Suspend and Resume
- Check Basic WWAN connectivity
- Check Device Manager entry

Repeat the above steps 5 times

ECR82789 and ECR83081 W7:Ericsson WWAN disappear in DM aft res S3 w/ GPS map open (LL-01368PA)
- No system and application hang after resume from suspend.
- WWAN adapter should be visible in Device Manager after resume from suspend.
- WWAN adapter should be visible in Device Manager when Google/Bing Maps is launched after resume from suspend.
- Device Manager entry
- Check Basic WWAN connectivity
- Hibernate and Resume
- Check Basic WWAN connectivity
- Launch GPS application and start the tracking
- Launch Google/Bing Maps
- Hibernate and Resume
- Check Basic WWAN connectivity
- Check Device Manager entry

Repeat the above steps 5 times
- No system and application hang after resume from hibernate.
- WWAN adapter should be visible in Device Manager after resume from hibernate.
- WWAN adapter should be visible in Device Manager when Google/Bing Maps is launched after resume from hibernate.
- Device Manager entry
- Check Basic WWAN connectivity
- Warm boot [system restart]
- Check Basic WWAN connectivity
- Launch GPS application and start the tracking
- Launch Google/Bing Maps
- Warm boot [system restart]
- Check Basic WWAN connectivity
- Check Device Manager entry

Repeat the above steps 5 times
- No system and application hang after system restart.
- WWAN adapter should be visible in Device Manager after system restart.
- Device Manager entry
- Check Basic WWAN connectivity
- Shutdown and Restart
- Check Basic WWAN connectivity
- Launch GPS application and start the tracking
- Launch Google/Bing Maps
- Shutdown and Restart
- Check Basic WWAN connectivity
- Check Device Manager entry

Repeat the above steps 5 times
- No system and application hang after shutdown and restart.
- WWAN adapter should be visible in Device Manager after shutdown and restart.

OTHER DETAILS
EUT Quantity : One system 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."
2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)"
(All Test Activity should be performed with AMT Enabled)
Test Item
Win 8
Win7 32
Win7 64
Installation
Main GUI
GPS Options
Help Menu
GPS functionality with Power Management
ThinkVantage Maps
GPS SIM Security Function Verification (applicable only for Ericsson WWAN cards)
GPS with Wireless WAN Device behavior in Device Manager


TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
This document is not yet modified.