Test Case

Show / Hide direct link   <ROOT> 4692PA: =ROOT==Obsolete= Wi-Fi Direct Verification on Windows 8 - PP-80454



Version 1
Created on 02/03/2012 10:54:11  by Yoshihiro Amenomiya
Last modified on  10/06/2016 18:48:56  by m_komatsu_nw
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify WIndows 8 native functions for Network team related test items
CRITERIA

All functions should work as expected.

No system malfunction / performance degradation.

EUT QUANTITY

Two system

EQUIPMENT

PA Networking facilities

Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE

OVERVIEW:

What is Wi-Fi Direct?

- Is a peer-to-peer connectivity technology

- Provides a secure, wireless connection between two devices

- Does not require a Wi-Fi router or joining a Wi-Fi network

- In Windows 8 Wi-Fi Direct

Is integrated into the Wi-Fi stack & the Device Experiences

Builds on existing Wi-Fi hardware

Allows concurrent connection to Internet & Devices

Is optimized for power savings

How Play To works in Windows 8

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-32bitWin10-64bit
1 Wi-Fi Direct device connection AAAA
2 Play to with Wi-Fi Direct AAAA
3 Power Management with Wi-Fi Direct AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Known Limitations/Restrictions/Information

Known Limitations
Restriction
Information

1. Supported WLAN cards:

- Intel

- Realtek

- Broadcom

Wi-Fi Direct device connection

- A new feature in Windows8, you can easily connect directly to WiFi Device.

- Can be set in the form of the wizard from the Control Panel.

Receivers

Windows 8 PCs running Windows Media Player

Wi-Fi Direct device connection

Test Procedure Expected Result(s)
Win 8
Prepare WiFi Direct Environment and Connect to Live Network.

- To Windows Media Player settings.

1. Launch the Windows Media Player (two systems)

2. Click Stream > click Turn ON media streaming

3. Media Streaming options window will show

4. Click Turn ON Media streaming button

5. Name your media library (optional)

6. Show devices on: Local Network

7. On Local network, click Allow All / Block All button or choose (by checking

Allowed checkbox) the available PCs/devices listed in listbox.

8. Click OK.

9. Click Stream > click Allow remote control of my Player...

10. Click Allow remote control on this network

11. Confirm that both systems can see in Control Panel > Devices and Printers

12. If the other system is not yet available in Control Panel > Devices and Printers,

please follow the steps in Adding Devices and Printers portion.

- To prepare the two Windows8 PCs.

- To allow wireless sharing settings.

?No error message during connection and while connected
A
Adding Devices and Printers.

1. Go to Control Panel > Devices and Printers

2. As shown in the figure below, click Add a Device button and locate System B from the selection (eg. Lenovo-PC, Windows Media Player)

3. Click "Next".

5. The selected device will be installed automatically and will be listed as shown in the figures below.

?No error message during connection and while connected

? Connection should complete successfully

? Connection to all access points do not drop

? Copy operation completes without error or corruption

A

Play to with Wi-Fi Direct

Test Procedure Expected Result(s)
Win 8
Send PC=System-A

Receive PC =System-B

1. Put any type of Movie/Music (AVI / MPEG / MP4 / MP3 / ETC) file to System A"s local drive (LibrariesVideos)

2. From Windows Media Player, on the upper right corner, click Play Tab and you will see an icon next to Clear list.

3. Click that icon > click "Play To" > confirm that System B was listed and choose.

> Play To - (System B Name) window will appear

4. Choose from the list you want to play in System B and press the Play button.

> Video is played in System-B.

Power Management with Wi-Fi Direct

4. Perform the following power management mode during playback.

S1, S2, S3

5. Resume from power management mode.

6. Verify that media can play normally and no error happens.

?No error message during connection and while connected

? Connection should complete successfully

? Connection to all access points do not drop

? Can Playback under Receiver.

A

OTHER DETAILS

EUT Quantity : Two system 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."

2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)" (All Test Activity should be performed with AMT Enabled)

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
Modified last: 2016-06-10 18:48:56.283, by Miyuki Komatsu_nw
Modified last: 2016-06-10 17:44:09.97, by Miyuki Komatsu_nw
Modified last: 2015-07-29 13:15:25.602, by Yoshihiro Amenomiya