Test Case

Show / Hide direct link   <ROOT> 4793PA: W8 : Mobile Hotspot - Lenovo Settings - PP-80377



Version 2.2
Created on 27/04/2012 12:59:59  by Yoshihiro Amenomiya
Last modified on  19/01/2017 10:12:10  by m_komatsu
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:Yes Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To confirm Network connections in Mobile HotSpot works on Windows 8 To verify the Network devices as SKU.
CRITERIA

All functions should work as expected.

No system malfunciton / performance degradation.

EUT QUANTITY

Tow systems

EQUIPMENT

PA Networking facilities

Critical Attribute:[0] : ETN - Ethernet

[1] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-32bitWin10-64bit
1 Mobile Hotspot Configuration and Basic Verification AANANA
2 Mobile Hotspot Component Verification AAAA
3 Mobile Hotspot Stress Test AAAA
4 Youtube playback on mobile Hotspot client systems AAAA
5 Power Management Verification AAAA
6

Uninstallation

AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

NOTE: AS PER MOBILE HOTSPOT MENTIONS UP TO 5 DEVICES, THIS IS TO CHECK BETTER PERFORMANCE: NO BLUESCREEN / ERROR / CRASH MESSAGES SHOULD OCCUR.

ONCE CONFIRMED 5 DEVICES CONNECTED, ADD MORE DEVICES AND CHECK IF PERFORMANCE IS STABLE.

Known Limitations/Restrictions/Information

Known Limitations
Restriction

[UR-03496SG]

Internet unable to share using Mobile Hotspot after changing WLAN adapter

Reference: ECR139996 W8:Unable to share internet using LS-MH19 aftr changing WLAN adapter

Reason: Limitation. If existing Wireless LAN card is swapped on the system and Driver is installed, User needs to restart the system before

using Lenovo Settings Mobile Hotspot.

Information

1. Desktop application support was already dropped from build GEMH08US onwards. (Ref: ECR130288-W8: The"Lenovo Mobile Hotspot"icon not show on Desktop windows)

2. Should be tested in all supported WLAN and WWAN adapters and Ethernet mode.

3. Some portions will not be available if No Dependency Package. Available in GELE15WW.

4.No Pulldown menu for "Share this network" text box in Mobile Hotspot

Reference:

ECR130758:Win 8: Pull down menu for available Networks not shown in LE MH

Reason:

Only connected internet profile will be listed in this pull down list.

5.Scroll bar not appears by default in Connected devices window in Mobile Hotspot

Reference:

ECR129683:Win8:Scroll bar not appear over connected devices list by default

Reason:

This is the behavior of Windows 8 List control and it is not expected to show scroll bar on metro UI when user does interact.

6. Lenovo Tablet (Coltrane) will not support Mobile Hotspot.

7. Windows 8.1 Mobile Hotspot is supported from Broadwell product onwards. NFC & 3G is not supported. Only Ethernet and WLAN is supported.

Even if system with NFC is available, menu will not be shown.

8. System will sleep using manual sleep and manual hibernation even 'Prevent to Sleep' option is checked.

Reference:

ECR208394: W8.1:QCANFA335:SUT enters S3 even prevent sleep option check in MHS

Based on Mobile Hotspot - Application Spec 20140228 v.2.0, page 5, bullet no.4, manual sleep and lid close operations are set by users intentionally.

Reason:

Manual sleep and hibernation of the machine is not supported in Mobile hotspot. It is by design.

9. Windows 10 Lenovo Settings mobile hotspot does not support sharing in User Mode
Reference:
ECR392524: Mobile hotspot cannot start sharing with standard User mode
Based on Lenovo Settings v.3.x hotspot spec page 3. Hotspot requires admin privilege for security purposes
Reason:
“Even create a hotspot do not need to ask admin privilege from technology side, but we follow security team in the SSRB process: The account must have privilege to create hotspot.”

Limitation

1. W8: Mobile hotspot shows wrong IP address of Client system (FR: 80%) approved as Permanent Limitation.

Ref: ECR142326: W8: Mobile hotspot GUI shows wrong IP address of Client system (FR: 80%) (Permanent Limitation)

ECR224145 W8.1: Connected Devices in Mobile Hotspot showing different IP Address

Restriction

1. Installation in Admin mode would not reflect in User Mode and vice versa. If you would like to show it for both Users and Admin, you need to install the package manually in each User/Admin.

Ref: Lenovo Settings Build letter: "2. When you install this build manually to a system, Lenovo Settings menu is available only for a user which installs it. It works as designed. If you would like to show it for all users, you need to install it as preload module".

Installation / Uninstallation

Note: Make sure to test this scenario while machine is connected to the internet

Test Procedure Expected Result(s)
Win8 32 Bit
Win8 64 Bit
Lenovo Settings Installation with Dependency Package

1. Install Latest Lenovo settings & Lenovo settings dependency package

2. Reboot machine if prompted.

3. After machine reboot, connect machine to any available wlan profile with internet connectivity.

- Confirm that there are no errors in the network device, running successfully.

- Confirm that there are no installation issues

A
A
Lenovo Settings Installation without Dependency Package

1. Install Latest Lenovo Settings.

2. Reboot machine if prompted.

3. After machine reboot, connect machine to any available wlan profile with internet connectivity

4. Launch Lenovo Settings

5. Choose Mobile Hotspot.

6. Mobile Hotspot's GUI should show in lower left:

"Please install the most up-to-date driver to continue" with "Install Now" button.

7. Click Install Now button.

8. Reboot once prompted.

- Confirm "Install Now" button is available in Mobile Hotspot GUI when Dependency Package was not installed.

- Confirm Mobile Hotspot "Connected Devices" portion is not available when Dependency Package was not installed.

- Confirm Dependency Package was installed successfully.

- Confirm that there are no installation issues

- Confirm that there are no errors in the network device, running successfully.

- Confirm Mobile Hotspot "Connected Devices" portion shows after installing Dependency package via internet

A
A
Uninstallation of Mobile Hotspot verification [UR-03520AP]

1. Install Mobile Hotspot/Lenovo Dependency Package as per build letter

2. Reboot machine if prompted.

3. Then install the latest Lenovo Settings driver as per build letter,

4. Reboot machine if prompted.

5. Go to lenovo settings and confirmed all tiles are working,

6. Go to Control Panel and uninstall lenovo dependency package/Mobile Hotspot adapter.

7. Reboot machine if prompted.

8. Launch Metro UI and go to Lenovo settings>> go to Mobile hotspot

ECR132732-No Popup message when launch Mobile Hotspot aftr uninstallation.

- Confirm that there is a error message appears saying that lenovo dependency package/mobile hotspot driver. for launching mobile Hotspot
A
A

Mobile Hotspot Configuration and Basic Verification

Test Procedure Expected Result(s)
Win8 32 Bit
Win8 64 Bit

Set up Mobile Hotspot

1. Launch Lenovo Settings from Start GUI

2. Click Mobile Hotspot

3. The connected wlan profile will automatically shown in "Share this network" text box.

4. Input the following to setup HotSpot.

a) [Name your HotSpot] field

b) [Create Password] field

(Supported in Windows 10)
1. Launch Lenovo Settings from Start GUI.
2. Click “Networks” from the menu on the left side of UI.
3. Under “Set up a Mobile Hotspot”, input the following:
- Hotspot name
- Password
4. Check the “Remember the name and password for this mobile hotspot” box to save inputted hotspot name and password after sharing

Check the “Prevent your computer from entering sleep mode when Mobile Hotspot started.” Box toprevent computer from entering sleep mode via System timer while mobile hotspot is sharing.

Mobile Hotspot Name and Password Verification
1. Under “Name your hotspot”, input different name length formats:
- Name with 1 – 10 characters
- Blank name
- Name with more than 10 characters
2. Under “Create a password”, input different password length formats:
- Password with 8-20 characters
- Blank password
- Password with less than 8 characters
- Password with more than 20 characters

3. Click “Start sharing” button with correct hotspot name/correct key format, wrong hotspot name/correct key format or vice versa.

- Confirm that Mobile Hotspot application is working properly after installation

- Confirm that no garbage, unnecessary texts (cut, not fit in text boxes, too small, etc.), buttons and links (if any) are working.

- Confirm that sharing will proceed with correct hotspot name format

- Confirm that error message “Hotspot name is empty or too long, the length of name should be: 1-10” will appear when trying to share hotspot with blank name or name with more than 10 characters.

- Confirm that appropriate error message will appear when inputting wrong hotspot name/key

- Confirm that hotspot will proceed sharing when inputting correct hotspot name/key

A
A

Connecting and Client connectivity

1. Press the Start sharing

2. Try connecting maximum of 8 client devices and access the hotspot:

2.1 Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

2.3 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

3. Once the devices are connected, the MAC addresses and device name should be shown in Mobile Hotspot's Connected Devices.

(Supported in Windows 10)
1. Click “Start Sharing” button.
2. According to information indicated, it is suggested to connect on no more than 5 devices.
3. Connect around five client devices in mobile hotspot.

4. Once the devices are connected, the MAC addresses or device names should be displayed under “Connected Devices”.
- Confirm that no BSOD or any error messages when client was connected in hotspot.

- Confirm that client can connect successfully to hotspot

- Confirm that correct client information was shown in Connected Devices.

A
A
Client connectivity verification

1. Client should successfully connected in hotspot.

2. Verify that the client can connect successfully to the internet.

- Confirm that client can connect successfully to hotspot

- Confirm that client can access internet successfully

A
A
Disconnecting and Client Disconnectivity [UR-03474SG]

1.Press the Stop sharing

2. Press the Start sharing to Restart the sharing & Try connecting other clients and access the hotspot.

- Confirm that no BSOD or any error messages when stopped internet sharing using hotspot.

- Confirm that client devices disconnected successfully from hotspot

- Confirm that no client information was shown in Connected Devices.

-Confirm that client can connect successfully to hotspot when start sharing

MH testing without Internet connectivity

1.Disconnect machine from wlan profile with internet connectivity.

2.Launch Lenovo Settings from Start GUI & Click Mobile Hotspot.

3.Press Start sharing.

(Supported in Windows 10)
1. Disconnect machine from network with Internet connection.
2. Launch Lenovo Settings from Start GUI and click “Networks” icon.

3. Click “Start sharing” button.

- Confirm that "Share this network" text box was blank.

- Confirm that error message"Mobile Hotspot requires an internet connection,please check your Connection and try again"

appears when start sharing.

- Confirm error message “Please ensure that your Windows account has administration permission; Your computer is already connected to the Internet; Your computer has a working wireless network adapter.” Appears when trying to share.

MH testing with Airplane mode Enabled [UR-03618AP]

1 .Connect to AP with internet connection.

2. Launch Lenovo Mobile Hotspot Metro App.

3. Enter Hotspot name and Password.

4. Start Mobile Hotspot.

5. Go to Desktop view and Turn ON Airplane mode.

6. Go back to Mobile Hotspot Metro App .

7. Click Start Sharing.

(Supported in Windows 10)
1. Connect to a network with Internet connection.
2. Launch Lenovo Settings from Start GUI.
3. Click “Networks” from the menu on the left side of the UI.
4. Enter hotspot name and key.
5. Click “Start sharing” button.
6. Turn Airplane mode ON.
7. Go back to Mobile Hotspot.

8. Click “Start sharing” again.

- Confirm that Mobile Hotspot can launch after enabling airplane mode.

- Confirm that Share this network on Mobile Hotspot app is not displayed.

- Confirm that Mobile Hotspot will not start with Airplane mode Enabled.

- Confirm that Mobile Hotspot in Lenovo Settings can be launched after enabling airplane mode.
- Confirm that mobile hotspot icon is OFF in Quick Panel
- Confirm that mobile hotspot will stop sharing after turning airplane mode on.

- Confirm that mobile hotspot can share again after turning airplane mode off.
A
A

MH testing with Airplane mode Disabled

1 .Connect to AP with internet connection.

2. Launch Lenovo Mobile Hotspot Metro App.

3. Enter Hotspot name and Password.

4. Start Mobile Hotspot.

5. Go to Desktop view and Confirm that Airplane mode is off

6. Go back to Mobile Hotspot Metro App .

7. Click Start Sharing.

(Supported in Windows 10)
1. Connect to a network with Internet connection.
2. Launch Lenovo Settings from Start GUI.
3. Click “Networks” from the menu on the left side of the UI.
4. Enter hotspot name and key.

5. Click “Start sharing” button.

- Confirm that Mobile Hotspot can launch.

- Confirm that Share this network on Mobile Hotspot app is displayed.

- Confirm that Mobile Hotspot will start with Airplane mode Enabled.

- Confirm that Mobile Hotspot in Lenovo Settings can be launched

- Confirm that mobile hotspot can be started
A
A

MH testing with 'Prevent to Sleep' option [UR-03695SG]

1. Connect to AP with internet connection

2. Launch Lenovo Mobile Hotspot Metro App.

3. Enter SSID and Password

4. Check the option "Prevent your computer from entering sleep mode when Mobile Hotspot started"

6. Click "Start Sharing" button

7. Confirm "Mobile Hotspot" will start successfully

8. Leave the system to idle for some time and check MH

9. Put the system to sleep through Power options and resume the system then check MH

9. Perform suspend and hibernation by timer. Check MH after suspend and hibernation.

10. Close the Lid for 20 seconds and open the Lid again to check MH

REF: ECR157999 :RG2:864:"Prevent from sleep" in MH not work w/LID close & manual sleep

(Supported in Windows 10)
1. Connect to network with Internet connection.
2. Launch Lenovo Settings from Start GUI.
3. Click “Networks” icon from the menu on the left side of the UI.
4. Enter mobile hotspot name and key.
5. Check “Prevent your computer from entering sleep mode when mobile hotspot started”.
6. Click “Start sharing” button.
7. Confirm that mobile hotspot will start successfully.
8. Perform suspend and hibernate by timer. Check mobile hotspot after resume.

Perform lid close for at least 30 seconds and checkmobile hotspot after opening lid.

- Confirm that Mobile Hotspot can lauch

- Confirm that the system will not enter sleep mode when Mobile Hotspot started

- Confirm that Mobile Hotspot in Lenovo Settings can be launched

- Confirm that system will not enter sleep mode when option is checked before starting mobile hotspot

MH testing with Manual Sleep and Manual HIbernation

1. Connect to AP with internet connection

2. Launch Lenovo Mobile Hotspot Metro App.

3. Enter SSID and Password

4. Check the option "Prevent your computer from entering sleep mode when Mobile Hotspot started"

6. Click "Start Sharing" button

7. Confirm "Mobile Hotspot" will start successfully

8. Put the system to sleep and hibernate through Power options and resume the system then check MH

REF: ECR208394 :W8.1:QCANFA335:SUT enters S3 even prevent sleep option check in MHS

(Supported in Windows 10)
1. Connect to network with Internet connection.
2. Launch Lenovo Settings from Start GUI.
3. Click “Networks” icon from the menu on the left side of the UI.
4. Enter mobile hotspot name and key.
5. Check “Prevent your computer from entering sleep mode when mobile hotspot started”.
6. Click “Start sharing” button.
7. Confirm that mobile hotspot will start successfully.
8. Perform suspend and hibernate via Power Options. Check mobile hotspot after resume.

Perform suspend and hibernate via Start menu. Check mobile hotspot after resume.

- Confirm that Mobile Hotspot can lauch

- Confirm that the system will enter sleep mode when Mobile Hotspot started

- Confirm that Mobile Hotspot in Lenovo Settings can be launched

- Confirm that system will not enter sleep mode when option is checked before starting mobile hotspot

GUI Function Confirmation

Test Item
Configuration
Results
Check Item / Criteria
Win 8 32
Win 8 64
Confirming Mobile Hotspot GUI
  1. Launch Mobile Hotspot from Metro Tile GUI > Lenovo Settings >> Wireless & Networks
  2. Check the following if available in GUI:

    a. On Set up a mobile hotspot:

    Check Share this network (if connected to AP, confirm the current connectivity SSID was listed)

    Check Name your hotspot

    Check Create a password

    Check Remember the name and password for this mobile hotspot

Check Prevent your computer from entering sleep mode when Mobile Hotspot started

Check if current connection under Location Awareness is correct.

Check Start sharing button

b. On Connected devices (Lenovo Dependency Package should be installed to show this feature)

Check Connected devices box

  1. Check also the words / grammars / spelling are correct.
  2. Check also Back button if working properly.
  3. Click Back button. Confirm Mobile Hotspot button in Quick Panel shows correct state.
  4. Relaunch Lenovo Settings. Confirm Mobile Hotspot button in Quick Panel shows correct state.
  5. Turn-off and Turn-on Mobile Hotspot through Quick Panel. Check the functionality of the hotspot.

Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

(Supported in Windows 10)
Mobile Hotspot Synchronization to Quick Panel Icon Confirmation
In Windows 10, the quick panel looks like this:

1. 1.Launch Lenovo Settings.
1. 2.Confirm that Mobile Hotspot icon is OFF in Quick Panel.
2. 3.Set up a mobile hotspot in Networks tab.
3. 4.Click “Start sharing” button.
4. 5.Go back to home page and confirm if Mobile Hotspot icon in Quick Panel is now ON.
5. 6.Stop sharing mobile hotspot and re-launch Lenovo Settings.
6. 7.Confirm that Mobile Hotspot icon in Quick Panel is now OFF.
ECR375225: W10: Lenovo Settings Mobile Hotspot not sync from previous after re-opening the application
Mobile Hotspot icon in Quick Panel after online update
Note: Applicable only when Lenovo Settings update is available
1. Open Lenovo Settings
2. Check that Mobile Hotspot icon in Quick Panel is available.
3. Set up mobile hotspot and start sharing.
4. Update Lenovo Settings.
5. After update, re-launch application and confirm if Mobile Hotspot is still available.
ECR379430: Mobile Hotspot icon lost in Quick Panel after rainbow update to 3.75.0 online with FR: 7/8 EUTs.
  • Confirm the GUI of Mobile Hotspot
  • Confirm all buttons are working properly
  • Confirm all text boxes can be inputted
  • Confirm checkbox is working properly
  • Confirm Back button is working properly
  • Confirm Mobile Hotspot button in Quick Panel working properly

- Confirm that Mobile Hotspot icon in Quick Panel is same with actual Mobile Hotspot status
- Confirm if Mobile Hotspot will not disappear after re-sharing and updating
A
A
1. Go to Lenovo Settings in Windows Tile GUI >> Wireless and Networks.2. Verify that 'Name your Hotspot' field under "Set up a mobile hotspot" in Wireless and Networks contains computer's Host Name and password field is empty.

3. Click back button to show Quick Panel in Lenovo Settings, click the Mobile Hotspot button in Quick Panel >> KEYPOINT

4. Confirm that no default name and password in ==>Wireless & Networks ->Mobile Hotspot.

Note: Do not share mobile hotspot with 'Remember the name and password for this mobile hotspot' checked.

Message should pop-up "Mobile hotspot requires information about internet connected profile, hotspot name and Key. Please input the information and try again."

Basic Power Management verification

Test Item Check Item / Criteria Configuration Result
Win 8 32
Win 8 64
  1. Login as Admin
  2. Make sure connected to live network.
  3. Launch Mobile Hotspot
  4. Create Hotspot connection
  5. Confirm that all GUI's are shown properly
  6. Suspend the system by pressing Fn+F4
  7. Resume after one minute
  8. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected
  9. Confirm status of Mobile hotspot in Lenovo Settings' Quick Panel.
Event Viewer / Lenovo Mobile Hotspot Service check:

1. Login as Admin

2. Make sure connected to live network.

3. Launch Mobile Hotspot

4. Create Hotspot connection

5. Confirm that all GUI's are shown properly

6. Suspend the system by pressing Fn+F4

7. Resume after one minute

8. Go to Event Viewer:

8.1 Right click My Computer > Manage > Event Viewer

8.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

9. Go to Problem Reports:

9.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

9.2 Open "View all problem reports"

9.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

10. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected

Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

  • No error message or system malfunction on resuming from Suspend
  • All GUI's must be shown correctly and clearly.
  • Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.
  • Check Mobile Hotspot in Quick Panel shows correct state and the same as in Wireless and Networks.
Stand alone
  • Login as Admin
    1. Make sure connected to live network.
    2. Launch Mobile Hotspot
    3. Create Hotspot connection
    4. Confirm that all GUI's are shown properly
    5. Hibernate the system by pressing Fn+F12
    6. Resume after one minute
    7. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected
    8. Confirm status of Mobile hotspot in Lenovo Settings' Quick Panel.
    Event Viewer / Lenovo Mobile Hotspot Service check:

    1. Login as Admin

    2. Make sure connected to live network.

    3. Launch Mobile Hotspot

    4. Create Hotspot connection

    5. Confirm that all GUI's are shown properly

    6. Hibernate the system by pressing Fn+F12

    7. Resume after one minute

    8. Go to Event Viewer:

    8.1 Right click My Computer > Manage > Event Viewer

    8.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

    9. Go to Problem Reports:

    9.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

    9.2 Open "View all problem reports"

    9.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

    10. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected

    Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

  • No error message or system malfunction on resuming from Hibernate
  • All GUI's must be shown correctly and clearly.
  • Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.
  • Check Mobile Hotspot in Quick Panel shows correct state and the same as in Wireless and Networks.
Stand alone
  • Login as Admin
    1. Make sure connected to live network.
    2. Launch Mobile Hotspot
    3. Create Hotspot connection
    4. Confirm that all GUI's are shown properly
    5. Lid Close the system
    6. Resume after one minute
    7. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected
    8. Confirm status of Mobile hotspot in Lenovo Settings' Quick Panel.
    Event Viewer / Lenovo Mobile Hotspot Service check:

    1. Login as Admin

    2. Make sure connected to live network.

    3. Launch Mobile Hotspot

    4. Create Hotspot connection

    5. Confirm that all GUI's are shown properly

    6. Lid Close the system

    7. Resume after one minute

    8. Go to Event Viewer:

    8.1 Right click My Computer > Manage > Event Viewer

    8.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

    9. Go to Problem Reports:

    9.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

    9.2 Open "View all problem reports"

    9.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

    10. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected

    Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

  • No error message or system malfunction on resuming from Lid Close
  • All GUI's must be shown correctly and clearly.
  • Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.
  • Check Mobile Hotspot in Quick Panel shows correct state and the same as in Wireless and Networks.
Stand alone
  • Login as Admin
    1. Make sure connected to live network.
    2. Launch Mobile Hotspot
    3. Create Hotspot connection
    4. Confirm that all GUI's are shown properly
    5. Reboot system
    6. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected
    7. Confirm status of Mobile hotspot in Lenovo Settings' Quick Panel.
    Event Viewer / Lenovo Mobile Hotspot Service check:

    1. Login as Admin

    2. Make sure connected to live network.

    3. Launch Mobile Hotspot

    4. Create Hotspot connection

    5. Confirm that all GUI's are shown properly

    6. Hibernate the system by pressing Fn+F12

    7. Resume after one minute

    8. Go to Event Viewer:

    8.1 Right click My Computer > Manage > Event Viewer

    8.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

    9. Go to Problem Reports:

    9.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

    9.2 Open "View all problem reports"

    9.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

    10. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected

    Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

  • No error message or system malfunction on Restart
  • All GUI's must be shown correctly and clearly.
  • Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.
  • Check Mobile Hotspot in Quick Panel shows correct state and the same as in Wireless and Networks.
Stand alone
  • Login as Admin
    1. Make sure connected to live network.
    2. Launch Mobile Hotspot
    3. Create Hotspot connection
    4. Confirm that all GUI's are shown properly
    5. Shutdown system
    6. Boot system after 1 minute
    7. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected
    8. Confirm status of Mobile hotspot in Lenovo Settings' Quick Panel.
    Event Viewer / Lenovo Mobile Hotspot Service check:

    1. Login as Admin

    2. Make sure connected to live network.

    3. Launch Mobile Hotspot

    4. Create Hotspot connection

    5. Confirm that all GUI's are shown properly

    6. Hibernate the system by pressing Fn+F12

    7. Resume after one minute

    8. Go to Event Viewer:

    8.1 Right click My Computer > Manage > Event Viewer

    8.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

    9. Go to Problem Reports:

    9.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

    9.2 Open "View all problem reports"

    9.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

    10. Verify that the GUIs are shown properly after resuming from suspend and the functions are working as expected

    Ref: ECR223894: Mobile Hotspot in Quick Panel shows incorrect state.

  • No error message or system malfunction on Shutdown / Boot
  • All GUI's must be shown correctly and clearly.
  • Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.
  • Check Mobile Hotspot in Quick Panel shows correct state and the same as in Wireless and Networks.
Stand alone
  • Login as User <== Removed !!

Windows 8.1 Mobile Hotspot is supported from Broadwell product onwards. NFC & 3G is not supported. Only Ethernet and WLAN is supported.

Mobile Hotspot Component Verification

Test Procedure Expected Result(s)
Win8 32 Bit
Win8 64 Bit
Using Intel WLAN as a host + Realtek and Broadcom as clients

1. Launch Lenovo Settings from Start GUI

2. Click Mobile Hotspot

3. The connected wlan profile will automatically shown in "Share this network" text box.

4. Input the following to setup HotSpot.

a) [Name your HotSpot] field

b) [Create Password] field

5. Press the Start sharing

6. Try connecting maximum of 8 client devices and access the hotspot:

6.1 Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

6.2 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS with Realtek and Broadcom WLAN adapters.

7. Once the devices are connected, the MAC addresses and device name should be shown in Mobile Hotspot's Connected Devices.

8. Client should successfully connected in hotspot.

9. Verify that the client can connect successfully to the internet.

- Confirm that no BSOD or any error messages when client was connected in hotspot.

- Confirm that client can connect successfully to hotspot

- Confirm that correct client information was shown in Connected Devices.

- Confirm that client can connect successfully to hotspot

- Confirm that client can access internet successfully

A
A
Using Realtek WLAN as a host + Intel and Broadcom as clients

1. Launch Lenovo Settings from Start GUI

2. Click Mobile Hotspot

3. The connected wlan profile will automatically shown in "Share this network" text box.

4. Input the following to setup HotSpot.

a) [Name your HotSpot] field

b) [Create Password] field

5. Press the Start sharing

6. Try connecting maximum of 8 client devices and access the hotspot:

6.1 Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

6.2 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS with Intel and Broadcom WLAN adapters.

7. Once the devices are connected, the MAC addresses and device name should be shown in Mobile Hotspot's Connected Devices.

8. Client should successfully connected in hotspot.

9. Verify that the client can connect successfully to the internet.

- Confirm that no BSOD or any error messages when client was connected in hotspot.

- Confirm that client can connect successfully to hotspot

- Confirm that correct client information was shown in Connected Devices.

- Confirm that client can connect successfully to hotspot

- Confirm that client can access internet successfully

A
A
Using Broadcom WLAN as a host + Intel and Realtek as clients

1. Launch Lenovo Settings from Start GUI

2. Click Mobile Hotspot

3. The connected wlan profile will automatically shown in "Share this network" text box.

4. Input the following to setup HotSpot.

a) [Name your HotSpot] field

b) [Create Password] field

5. Press the Start sharing

6. Try connecting maximum of 8 client devices and access the hotspot:

6.1 Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

6.2 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS with Intel and Realtek WLAN adapters.

7. Once the devices are connected, the MAC addresses and device name should be shown in Mobile Hotspot's Connected Devices.

8. Client should successfully connected in hotspot.

9. Verify that the client can connect successfully to the internet.

- Confirm that no BSOD or any error messages when client was connected in hotspot.

- Confirm that client can connect successfully to hotspot

- Confirm that correct client information was shown in Connected Devices.

- Confirm that client can connect successfully to hotspot

- Confirm that client can access internet successfully

A
A

Mobile Hotspot Stress Test

1. Configure the Mobile Hotspot of host machine as stated on the previous test items.

2. Connect to the hotspot maximum of 8 devices simultaneously (such as Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS)

3. Confirm connectivity success by continuous ping/browsing to the internet of each devices.

4. After confirming connectivity success of all devices, run stress test (eg. play long video using You Tube) the devices simultaneously.

5. Run the stress test minimum of 30 minutes.

6. Test the above procedures by doing the underlined scenarios below:

Check Mobile Hotspot Stress Test using Ethernet connectivity

Host Machines
Ethernet drivers
Environment
Power Options
No. of Client Devices Connected
Time
Results
Remarks
Standalone
Cradle Mode (for Tablet)
W8 32
W8 64
<mention here the test machine to be used as host machine>
<mention here the driver used in host machine>
<mention here if the host machine is in AC / DC mode>
<mention here if the host machine is in AC / DC mode>
<mention here how many minutes/hours/never put the host machine to enter sleep mode>
<mention here the number and specify all the devices connected to the host machine>
<mention here how many minutes/hours the stress test of the connected devices>
<mention here if PASS / FAIL>
<mention here if PASS / FAIL>
<mention here if any symptoms/observation was seen,

examples:

- No connection drop

- The 5th device cannot connect anymore

- After 45mins, while trying to connect 5th machine, all system disconnected with host system going to limited connectivity. If we do not play Youtube, then no such problem happens.>

<just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above>

Check Mobile Hotspot Stress Test using WLAN connectivity

Host Machines
WLAN drivers
Environment
Power Options
No. of Client Devices Connected
Time
Results
Remarks
Standalone
Cradle Mode (for Tablet)
W8 32
W8 64
<mention here the test machine to be used as host machine>
<mention here the driver used in host machine>
<mention here if the host machine is in AC / DC mode>
<mention here if the host machine is in AC / DC mode>
<mention here how many minutes/hours/never put the host machine to enter sleep mode>
<mention here the number and specify all the devices connected to the host machine>
<mention here how many minutes/hours the stress test of the connected devices>
<mention here if PASS / FAIL>
<mention here if PASS / FAIL>
<mention here if any symptoms/observation was seen,

examples:

- No connection drop

- The 5th device cannot connect anymore

- After 45mins, while trying to connect 5th machine, all system disconnected with host system going to limited connectivity. If we do not play Youtube, then no such problem happens.>

<just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above>

Check Mobile Hotspot Stress Test using WWAN connectivity

Host Machines
WWAN drivers
Environment
Power Options
No. of Client Devices Connected
Time
Results
Remarks
Standalone
Cradle Mode

(for Tablet systems)

W8 32
W8 64
<mention here the test machine to be used as host machine>
<mention here the driver used in host machine>
<mention here if the host machine is in AC / DC mode>
<mention here if the host machine is in AC / DC mode>
<mention here how many minutes/hours/never put the host machine to enter sleep mode>
<mention here the number and specify all the devices connected to the host machine>
<mention here how many minutes/hours the stress test of the connected devices>
<mention here if PASS / FAIL>
<mention here if PASS / FAIL>
<mention here if any symptoms/observation was seen,

examples:

- No connection drop

- The 5th device cannot connect anymore

- After 45mins, while trying to connect 5th machine, all system disconnected with host system going to limited connectivity. If we do not play Youtube, then no such problem happens.>

<just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above> <just add rows for other test machines and mention the same as above>

Youtube playback on mobile Hotspot client systems

Test Procedure Expected Result(s)
Win8 32 Bit
Win8 64 Bit
Youtube playback on Client systems:

1. Launch Lenovo Settings from Start GUI

2. Click Mobile Hotspot

3. The connected wlan profile will automatically shown in "Share this network" text box.

4. Input the following to setup Hotspot.

a) [Name your Hotspot] field

b) [Create Password] field

5. Press the Start sharing

6. Try connecting maximum of 5 client devices and access the hotspot:

6.1 Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame, iPad, iPhone) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

6.2 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS

7. Once the devices are connected, the MAC addresses and device name should be shown in Mobile Hotspot's Connected Devices.

8. Client should successfully connected in hotspot.

9. Verify that the client can connect successfully to the internet.

10.Open browser & play HD video(search for 1080P video) on Youtube in Client systems.

11.Confirm video plays smooth & no loss in Connectivity.

Result:

Client-playback
240p
360p
480p
720p
1080p
1
2
3
4
5

Simultaneous playback result:

Client-playback
1
2
3
4
5
Result
240p
360p
480p
720p
1080p

Client -Playback
Video Quality
1
240p
360p
360p
480p
720p
1080p
720p
2
360p
480p
480p
480p
720p
1080p
720p
3
480p
480p
1080p
480p
720p
1080p
720p
4
720p
720p
1080p
720p
480p
720p
720p
5
1080p
720p
720p
720p
1080p
720p
1080p
Result

Note:

Repeat the test steps & update the table with HD playback on Host -Machine also.

Repeat test steps with both Ethernet & WLAN connection.

- Confirm that HD video plays smooth in all systems.

-Confirm no loss or drop in connectivity.

-Confirm stability of Host machine

-Confirm that the connected devices should not disconnect and continue its functionality (the video streaming should continue).

A
A

Power Management Verification

Test Procedure Expected Result(s)
Win8 32 Bit
Win8 64 Bit
Basic PM Operations

Suspend / Resume

1. Perform Suspend / Resume in Mobile Hotspot system.

2. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Hibernate / Resume

1. Perform Hibernate / Resume in Mobile Hotspot system.

2. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Lid Close / Resume

1. Perform Lid Close / Resume in Mobile Hotspot system.

2. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Reboot

1. Perform Reboot in Mobile Hotspot system.

2. After Mobile Hotspot system reboot.

3. Connect any supported client to the Mobile Hotspot system through hotspot connection.

System Shutdown

1. Perform Shutdown in Mobile Hotspot system.

2. Boot again Mobile Hotspot system.

3. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Perform each PM operations for 5-10 trials

- Confirm that connection is established successfully after PM operations.

- Confirm that all functions (buttons, links, etc.) can be performed successfully after PM operations.

- Confirm that no error messages should show after PM operations.

A
A
Connected Standby Mode Operations (for Connected Standby supported systems only)

Note:

Make sure to perform this item by the following environment below:

- AC/DC Mode

- AC Docked in Cradle (for Tablet systems)

- AC USB (for Tablet systems)

1. Connect up to maximum of 8 clients and access the hotspot

2. Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

2.3 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS

2.4 While the devices are connected to hotspot, play video streaming using You Tube.

3. Let the host system enter in Connected Standby mode.

4. Observe the connected devices.

Ref. ECR145387, W8:Mobile Hotspot disconnects when enter into S3 in AC/DC mode

- Confirm that the connected devices should not disconnect and continue its functionality (the video streaming should continue).
A
A
Event Viewer / Lenovo Hotspot Service Verification

Suspend / Resume

1. Perform Suspend in Mobile Hotspot system.

2. Resume after 1 minute from Suspend Mobile Hotspot system.

3. Go to Event Viewer:

3.1 Right click My Computer > Manage > Event Viewer

3.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

4. Go to Problem Reports:

4.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

4.2 Open "View all problem reports"

4.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

5. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Hibernate / Resume

1. Perform Hibernate in Mobile Hotspot system.

2. Resume after 1 minute from Hibernate Mobile Hotspot system.

3. Go to Event Viewer:

3.1 Right click My Computer > Manage > Event Viewer

3.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

4. Go to Problem Reports:

4.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

4.2 Open "View all problem reports"

4.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

5. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Lid Close / Resume

1. Perform Lid Close in Mobile Hotspot system.

2. Resume after 1 minute from Lid Close Mobile Hotspot system.

3. Go to Event Viewer:

3.1 Right click My Computer > Manage > Event Viewer

3.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

4. Go to Problem Reports:

4.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

4.2 Open "View all problem reports"

4.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

5. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Reboot

1. Perform Reboot in Mobile Hotspot system.

2. After Mobile Hotspot system reboot.

3. Go to Event Viewer:

3.1 Right click My Computer > Manage > Event Viewer

3.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

4. Go to Problem Reports:

4.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

4.2 Open "View all problem reports"

4.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

5. Connect any supported client to the Mobile Hotspot system through hotspot connection.

System Shutdown

1. Perform Shutdown in Mobile Hotspot system.

2. Boot again Mobile Hotspot system.

3. Go to Event Viewer:

3.1 Right click My Computer > Manage > Event Viewer

3.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

4. Go to Problem Reports:

4.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

4.2 Open "View all problem reports"

4.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

5. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Perform each PM operations for 5-10 trials

Connected Standby Mode (for Connected Standby supported systems only)

1. Connect up to maximum of 8 clients and access the hotspot

2. Using Smart Phones, Wireless Printer, Mobile Phones w/ Wi-Fi capability, Wi-Fi Photo Frame) with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS.

2.3 Using other machines with different OS (such as Android, iOS, Google Chrome, etc.) or with same OS

2.4 While the devices are connected to hotspot, play video streaming using You Tube.

3. Let the host system enter in Connected Standby mode.

4. Resume after 1 minute.

5. Go to Event Viewer:

5.1 Right click My Computer > Manage > Event Viewer

5.2 Confirm that there are NO Critical / Error / Warning messages for Lenovo Hotspot Service.

6. Go to Problem Reports:

6.1 Go to Control Panel then type Problem Reports in "Search Control Panel" textbox

6.2 Open "View all problem reports"

6.3 Confirm that there are NO crash / stopped working messages for Lenovo Hotspot Service.

7. Connect any supported client to the Mobile Hotspot system through hotspot connection.

Perform each PM operations for 5-10 trials

- Confirm that connection is established successfully after PM operations.

- Confirm that all functions (buttons, links, etc.) can be performed successfully after PM operations.

- Confirm that no error messages should show after PM operations.

- Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.

Connected Standby:

- Confirm that the connected devices should not disconnect and continue its functionality (the video streaming should continue).

- Confirm there are no error / crash / critical / warning messages under Event Viewer and Problem Reports.

A
A

OTHER DETAILS

EUT Quantity : Tow systems 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."

2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)" (All Test Activity should be performed with AMT Enabled) The link "Test Case DB" has been extracted

TEMS Reviewer Log:
Review Logs
Created last 2016-06-13 14:13:19 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-10-18 17:22:33 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Attached files :

Update History:
Modified last: 2017-01-19 10:12:10.164, by Miyuki Komatsu, Remove W10 from Test Item matrix
Modified last: 2017-01-19 09:58:18.605, by Miyuki Komatsu, Remove W10 from Title
Modified last: 2016-10-18 14:34:23.957, by Miyuki Komatsu_nw, TCUR: PAUR- 538 completed
Modified last: 2016-10-18 14:30:40.857, by Miyuki Komatsu_nw, TCUR continued
Modified last: 2016-10-18 14:22:49.356, by Miyuki Komatsu_nw, TCUR continued.
Modified last: 2016-10-18 14:14:49.066, by Miyuki Komatsu_nw, TCUR:PAUR- 538