Test Case

Show / Hide direct link   <ROOT> 4817PA: =ROOT==Obsolete=Win 8 / 10 : Mobile Broadband for MetroStyle App Test - PP-80461



Version 1.1
Created on 29/05/2012 10:02:30  by Yoshihiro Amenomiya
Last modified on  10/06/2016 18:51:31  by m_komatsu_nw
Summary
Preconditions
Status:   New
Priority:   Medium
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Basic Function
Lessons Learned:No Phase:FVT, SIV (BBFV), SIT
Locations:Inhouse: AWS and Cambridge, Inhouse: AWS, Inhouse: Cambridge, Compal, Flextronics, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:To verify Mobile Broadband application using Lenovo SIM
CRITERIA

Refer critera in the procedure section

EUT QUANTITY

Two systems

EQUIPMENT

PA Networking facilities

Critical Attribute:[0] : WLS - Wireless

CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-32bitWin10-64bit
1 Lenovo Mobile Broadband Activation (LMA) - Launching AAAA
2 LMA Utility Coexistence between Lenovo Applications AAAA
3 Plan Charges / Balance Check Verification : With Single Plan and Same Carrier [To be covered by Macheen] AAAA
4 Plan Charges / Balance Check Verification : With Different Plan and Different Carrier [To be covered by Macheen] AAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS

EUT Quantity : Two systems 1. "Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead."

2. "Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case)" (All Test Activity should be performed with AMT Enabled) <

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :

Update History:
Modified last: 2016-06-10 18:51:31.148, by Miyuki Komatsu_nw
Modified last: 2016-06-10 17:47:21.56, by Miyuki Komatsu_nw