Test Case

Show / Hide direct link   <MAIN> 5762PA: W10: WLAN Auto Disconnect w/WiredLAN - PP-81349



Version 1.1
Created on 21/12/2016 16:18:19  by m_komatsu
Summary

New Function on KabyLake

Preconditions

BIOS Setup implement Enable/Disable UI.

Status:   Review Complete
Priority:   High
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to attached Test Procedure
CRITERIA

Expectation to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN, WiredLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE

Refer to Attached Test Procedure

STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

S0 WLAN Auto Disconnect

AA
2

WoWLAN w/ WL AutoDiscon

AA
3

S0 Disable WLAN Auto Discon

AA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2016-12-21 16:25:37 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Attached files :
Test Procedure - 5762PA_W10_WLANAutoDisConnect wWiredLAN_20161221.xlsx (36085 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 21/12/2016
Update History:
This document is not yet modified.
Version Update History:
2016-12-21 16:18:19, Version 1.1, m_komatsu, No issue : WLAN will sometime be disconnected on W10/W8.1, if leave EUT after ping/xcopy. Though TestCase doesn't request to check.

Other versions
Version 1


Version 1
Created on 23/08/2016 19:15:06  by m_komatsu_nw
Last modified on  13/09/2016 14:17:56  by m_komatsu_nw
Summary

New Function on KabyLake

Preconditions

BIOS Setup implement Enable/Disable UI.

Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to attached Test Procedure
CRITERIA

Expectation to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN, WiredLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE

Refer to Attached Test Procedure

STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

S0 WLAN Auto Disconnect

AA
2

WoWLAN w/ WL AutoDiscon

AA
3

S0 Disable WLAN Auto Discon

AA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2016-09-14 18:45:14 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-09-13 14:17:56.856, by Miyuki Komatsu_nw, Initial
Modified last: 2016-08-31 10:31:25.865, by Miyuki Komatsu_nw, Title was modified.
Modified last: 2016-08-31 10:28:32.026, by Miyuki Komatsu_nw
Modified last: 2016-08-31 10:25:45.64, by Miyuki Komatsu_nw
Modified last: 2016-08-26 17:58:36.7, by Miyuki Komatsu_nw