Test Case

Show / Hide direct link   <MAIN> 5763PA: W10: WoWirelessLAN - PP-81350



Version 1.3
Created on 26/05/2017 17:51:53  by m_komatsu
Last modified on  26/05/2017 17:54:26  by m_komatsu
Summary
1. To verify Wake On WireleeLAN function on the target OS.
     Wake on Magic Packet
     Wake on Pattern Match (Bitmap Pattern Match) <== So far, no tool available, No Test Case
Preconditions

0. BIOS implement the function

1. EUT and Server PC Setup by "5768PA:W10_EUT and Server PC Setup"
2. PM Event Coverage defined based upon "5764PA:W10_PM Events Operation and Priority"
Status:   Review Complete
Priority:   High
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to Attached Test Procedure
CRITERIA

Expectatoin to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE
PM event coverage is defined by PM Event Priority and Test Phase, Full, Regression, FFRT, Change Component and Function.
Test coverage (if relating Component/Function is change, other condition to be added)
Full Test (FVT, SIT) : Mandatory, High, Medium, Low
Regression : Mandatory, High
FFRT : Mandatory, High, Medium
Quick FFRT : Mandatory
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

Wake on Magic Packet

AA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2017-05-26 18:23:01 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Attached files :
Test Procedure - 5763PA_W10_WoWirelessLAN_20170526.xlsx (35580 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 26/05/2017
Update History:
Modified last: 2017-05-26 17:54:09.923875, by Miyuki Komatsu, Modify Pattern Match in Summary
Version Update History:
2017-05-26 17:51:53, Version 1.3, m_komatsu, Remove Pattern Match (Bitmap Pattern Match) due to no exe available, and Low priority
2017-03-15 14:29:13, Version 1.2, m_komatsu, Add Test Items Overview for each Test Category
2016-09-07 16:00:46, Version 1.1, m_komatsu_nw, 1. EUT and Server PC Setup by "5768PA:W10_EUT and Server PC Setup" 2. PM Event Coverage defined based upon "5764PA:W10_PM Events Operation and Priority"

Other versions
Version 1.2


Version 1.2
Created on 15/03/2017 14:29:13  by m_komatsu
Last modified on  15/03/2017 14:34:28  by m_komatsu
Summary
1. To verify Wake On WireleeLAN function on the target OS.
     Wake on Magic Packet
     Wake on Pattern Match
Preconditions

0. BIOS implement the function

1. EUT and Server PC Setup by "5768PA:W10_EUT and Server PC Setup"
2. PM Event Coverage defined based upon "5764PA:W10_PM Events Operation and Priority"
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to Attached Test Procedure
CRITERIA

Expectatoin to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE
PM event coverage is defined by PM Event Priority and Test Phase, Full, Regression, FFRT, Change Component and Function.
Test coverage (if relating Component/Function is change, other condition to be added)
Full Test (FVT, SIT) : Mandatory, High, Medium, Low
Regression : Mandatory, High
FFRT : Mandatory, High, Medium
Quick FFRT : Mandatory
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

Wake on Magic Packet

AA
2

Wake on Pattern Match

DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2017-03-15 14:46:15 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-03-15 14:34:28.883, by Miyuki Komatsu

Version 1.1


Version 1.1
Created on 07/09/2016 16:00:46  by m_komatsu_nw
Last modified on  15/03/2017 14:28:07  by m_komatsu
Summary
1. To verify Wake On WireleeLAN function on the target OS.
     Wake on Magic Packet
     Wake on Pattern Match
Preconditions

0. BIOS implement the function

1. EUT and Server PC Setup by "5768PA:W10_EUT and Server PC Setup"
2. PM Event Coverage defined based upon "5764PA:W10_PM Events Operation and Priority"
Status:   New
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to Attached Test Procedure
CRITERIA

Expectatoin to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE
PM event coverage is defined by PM Event Priority and Test Phase, Full, Regression, FFRT, Change Component and Function.
Test coverage (if relating Component/Function is change, other condition to be added)
Full Test (FVT, SIT) : Mandatory, High, Medium, Low
Regression : Mandatory, High
FFRT : Mandatory, High, Medium
Quick FFRT : Mandatory
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

Wake on Magic Packet

AA
2

Wake on Pattern Match

DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2016-09-07 17:48:37 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-09-27 10:54:45 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-03-15 14:28:07.946, by Miyuki Komatsu, Manual Procedure w/ PASW Test Suit
Modified last: 2016-09-27 10:17:40.477, by Miyuki Komatsu_nw
Modified last: 2016-09-27 10:17:31.975, by Miyuki Komatsu_nw
Modified last: 2016-09-07 16:06:03.994, by Miyuki Komatsu_nw, Separate "5768PA:W10_EUT and Server PC Setup" and "5764PA:W10_PM Events Operation and Priority"

Version 1


Version 1
Created on 23/08/2016 19:22:28  by m_komatsu_nw
Last modified on  30/08/2016 11:39:10  by m_komatsu_nw
Summary

Refer to Attached Test Procedure

Preconditions

BIOS implement the function

Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Advanced Function
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:Refer to Attached Test Procedure
CRITERIA

Expectatoin to be refered in Attached Test Procedure

EUT QUANTITY

Refer to Attached Test Procedure

EQUIPMENT

Refer to Attached Test Procedure

Critical Attribute:BIOS, WirelessLAN
CONFIGURATION

Refer to NW Config

REFERENCE PROCEDURE
PM event coverage is defined by PM Event Priority and Test Phase, Full, Regression, FFRT, Change Component and Function.
Test coverage (if relating Component/Function is change, other condition to be added)
Full Test (FVT, SIT) : Mandatory, High, Medium, Low
Regression : Mandatory, High
FFRT : Mandatory, High, Medium
Quick FFRT : Mandatory
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win10-32bitWin10-64bit
1

Wake on Magic Packet

AA
2

Wake on Pattern Match

DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

Refer to Attached Test Procedure

OTHER DETAILS

Refer to Attached Test Procedure

TEMS Reviewer Log:
Review Logs
Created last 2016-08-29 14:35:57 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-08-29 16:46:21 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-08-31 19:27:09 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-08-30 11:39:10.462, by Miyuki Komatsu_nw, PM event Coverage was corrected.
Modified last: 2016-08-29 16:19:03.018, by Miyuki Komatsu_nw, Removed "-draft-" from Title. And Test Procedure updated to add TimeZone and Date&Time of Local Tester location.
Modified last: 2016-08-29 14:09:09.036, by Miyuki Komatsu_nw, Initial