Test Case

Show / Hide direct link   <MAIN> 5768PA: W10: EUT and ServerPC Setup - PP-81355



Version 2.1
Created on 27/09/2017 06:16:54  by m_komatsu
Last modified on  28/09/2017 05:18:31  by m_komatsu
Summary
0. Everythink from Memory key
   0-1. Copy PASWTestSuit_yyyymmdd.7z in Root of Memory key
   0-2. Unzip it by "Extract Here"
   0-3. SetupPASWTestSuitNW_fromMemKey.bat
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2017mmdd.pptx
 
3. Password : Lenovo123
Preconditions
Refer to Procedure attached
Status:   Review Complete
Priority:   Mandatory
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-09-27 06:48:25 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Attached files :
Setup Procedure - 5768PA_W10_EUT and ServerPC Setup_20170927.xlsx (92075 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 27/09/2017
PASW Test Suit - PASWTestSuit_20170926.7z (25712565 bytes, application/octet-stream) 27/09/2017
Update History:
Modified last: 2017-09-28 05:18:31.399756, by Miyuki Komatsu, Deleted 5768PA_W10_EUT and ServerPC Setup_20170922.xlsx
Modified last: 2017-09-28 05:18:01.642933, by Miyuki Komatsu, Uploaded 5768PA_W10_EUT and ServerPC Setup_20170927.xlsx
Modified last: 2017-09-28 05:16:55.139782, by Miyuki Komatsu, Deleted PASWTestSuit_20170922.7z
Modified last: 2017-09-28 05:16:27.829919, by Miyuki Komatsu, Uploaded PASWTestSuit_20170926.7z
Modified last: 2017-09-28 05:15:31.184608, by Miyuki Komatsu, Procedure update
Version Update History:
2017-09-27 06:16:54, Version 2.1, m_komatsu, Apply Total Loop Interval in CYCLE and LOOP batch
2017-09-22 07:46:52, Version 2, m_komatsu, Batch for Parallel execution of Ping and Xcopy
2017-07-06 06:42:33, Version 1.9, m_komatsu, Make Setup easier
2017-06-08 13:12:24, Version 1.8, m_komatsu, Add detail of Preload and Full Shutdown before OOBE
2017-03-14 17:54:51, Version 1.7, m_komatsu, "EUT" and "EUT and ServerPC" Setup, EXECbatch updated
2017-01-26 11:48:03, Version 1.6, m_komatsu, RS2
2016-12-20 15:02:38, Version 1.5, m_komatsu_nw, W7 Support (due to date format is different from W10)
2016-12-01 17:52:13, Version 1.4, m_komatsu_nw, TestProcedure: 5768PA_W10_EUT and Server Setup_20161130.xlsx PASWTestSuit: EXECbatch_20161130, AutoLogsNW_20161128, 2CMDandSetup_20161130
2016-10-06 16:22:53, Version 1.3, m_komatsu_nw, Provide SampleSetup
2016-10-03 09:59:26, Version 1.2, m_komatsu_nw, EXECbatch and AutoLogsNW were attached.
2016-09-09 19:13:02, Version 1.1, m_komatsu_nw, Initialization of Environment Value (under test)

Other versions
Version 2


Version 2
Created on 22/09/2017 07:46:52  by m_komatsu
Last modified on  23/09/2017 06:46:24  by m_komatsu
Summary
0. Everythink from Memory key
   0-1. Copy PASWTestSuit_yyyymmdd.7z in Root of Memory key
   0-2. Unzip it by "Extract Here"
   0-3. SetupPASWTestSuitNW_fromMemKey.bat
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2017mmdd.pptx
 
3. Password : Lenovo123
Preconditions
On RS2, How to enable Command Prompt (Admin) in Win+X Menu, 
1. Enter Taskbar Settings” by Win+X, N, Click “Personalization” > Taskbar
2. Turn-Off “Replace Command Prompt w/ PowerShell” by Turn-Off, 
                 “Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X”
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-09-22 09:49:18 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-09-23 06:46:24.253508, by Miyuki Komatsu, Deleted 5768PA_W10_EUT and ServerPC Setup_20170706.xlsx
Modified last: 2017-09-23 06:46:02.967899, by Miyuki Komatsu, Deleted PASWTestSuit_20170706.7z
Modified last: 2017-09-23 06:45:04.703294, by Miyuki Komatsu, Uploaded 5768PA_W10_EUT and ServerPC Setup_20170922.xlsx
Modified last: 2017-09-23 06:44:02.702352, by Miyuki Komatsu, Uploaded PASWTestSuit_20170922.7z

Version 1.9


Version 1.9
Created on 06/07/2017 06:42:33  by m_komatsu
Last modified on  06/07/2017 13:50:54  by m_komatsu
Summary
0. Everythink from Memory key
   0-1. Copy PASWTestSuit_yyyymmdd.7z in Root of Memory key
   0-2. Unzip it by "Extract Here"
   0-3. SetupPASWTestSuitNW_fromMemKey.bat
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2017mmdd.pptx
 
3. Password : Lenovo123
Preconditions
On RS2, How to enable Command Prompt (Admin) in Win+X Menu, 
1. Enter Taskbar Settings” by Win+X, N, Click “Personalization” > Taskbar
2. Turn-Off “Replace Command Prompt w/ PowerShell” by Turn-Off, 
                 “Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X”
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-07-06 09:59:39 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-07-06 13:50:54.634644, by Miyuki Komatsu, Uploaded 5768PA_W10_EUT and ServerPC Setup_20170706.xlsx
Modified last: 2017-07-06 13:49:43.076954, by Miyuki Komatsu, Deleted 5768PA_W10_EUT and ServerPC Setup_20170508.xlsx
Modified last: 2017-07-06 13:49:23.503435, by Miyuki Komatsu, Deleted EXECbatch_20170314.7z
Modified last: 2017-07-06 13:48:59.862544, by Miyuki Komatsu, Deleted AutoLogsNW_20170314.7z
Modified last: 2017-07-06 13:48:37.982561, by Miyuki Komatsu, Deleted 2CMDandSetup_20170314.7z
Modified last: 2017-07-06 13:48:08.390356, by Miyuki Komatsu, Uploaded PASWTestSuit_20170706.7z
Modified last: 2017-07-06 13:46:49.190751, by Miyuki Komatsu, Procedure and Attachment were updated.

Version 1.8


Version 1.8
Created on 08/06/2017 13:12:24  by m_komatsu
Last modified on  08/06/2017 13:15:42  by m_komatsu
Summary
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2017mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
On RS2, How to enable Command Prompt (Admin) in Win+X Menu, 
1. Enter Taskbar Settings” by Win+X, N, Click “Personalization” > Taskbar
2. Turn-Off “Replace Command Prompt w/ PowerShell” by Turn-Off, 
                 “Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X”
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-06-08 15:02:01 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-06-08 13:15:42.531371, by Miyuki Komatsu, Update Test Procedure to add Preload and Full shutdown before OOBE

Version 1.7


Version 1.7
Created on 14/03/2017 17:54:51  by m_komatsu
Last modified on  14/03/2017 18:40:44  by m_komatsu
Summary
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2017mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
On RS2, How to enable Command Prompt (Admin) in Win+X Menu, 
1. Enter Taskbar Settings” by Win+X, N, Click “Personalization” > Taskbar
2. Turn-Off “Replace Command Prompt w/ PowerShell” by Turn-Off, 
                 “Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X”
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-03-15 10:53:42 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-03-14 18:40:44.492, by Miyuki Komatsu, PASW Test Suit v2.1.0

Version 1.6


Version 1.6
Created on 26/01/2017 11:48:03  by m_komatsu
Last modified on  26/01/2017 11:54:10  by m_komatsu
Summary
0-a : From NW server via Wifi or Ether connection
0-a-1. Unzip 2CMDsandSetup.7z w/ Lenovo123 into USB Mem key
0-a-2. Modify SampleSetupPASWTestSuite.cmd by refering NW team batch named SetupPASWTestSuiteNW.cmd
0-a-3. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-a-4. Run the prepared Setupxxxx.cmd in Step 0-2.
 
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2016mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
On RS2, How to enable Command Prompt (Admin) in Win+X Menu, 
1. Enter Taskbar Settings” by Win+X, N, Click “Personalization” > Taskbar
2. Turn-Off “Replace Command Prompt w/ PowerShell” by Turn-Off, 
                 “Replace Command Prompt with Windows PowerShell in the menu when I right-click the start button or press Windows key+X”
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2017-01-26 13:52:41 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-01-26 11:54:10.593, by Miyuki Komatsu, Add Workaround in Precondition On RS2, How to enable Command Prompt (Admin) in Win+X Menu,

Version 1.5


Version 1.5
Created on 20/12/2016 15:02:38  by m_komatsu_nw
Summary
0-a : From NW server via Wifi or Ether connection
0-a-1. Unzip 2CMDsandSetup.7z w/ Lenovo123 into USB Mem key
0-a-2. Modify SampleSetupPASWTestSuite.cmd by refering NW team batch named SetupPASWTestSuiteNW.cmd
0-a-3. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-a-4. Run the prepared Setupxxxx.cmd in Step 0-2.
 
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2016mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-12-22 12:01:01 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
This document is not yet modified.

Version 1.4


Version 1.4
Created on 01/12/2016 17:52:13  by m_komatsu_nw
Summary
0-a : From NW server via Wifi or Ether connection
0-a-1. Unzip 2CMDsandSetup.7z w/ Lenovo123 into USB Mem key
0-a-2. Modify SampleSetupPASWTestSuite.cmd by refering NW team batch named SetupPASWTestSuiteNW.cmd
0-a-3. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-a-4. Run the prepared Setupxxxx.cmd in Step 0-2.
 
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2016mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-12-02 18:31:39 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
This document is not yet modified.

Version 1.3


Version 1.3
Created on 06/10/2016 16:22:53  by m_komatsu_nw
Last modified on  28/11/2016 19:03:30  by m_komatsu_nw
Summary
0-a : From NW server via Wifi or Ether connection
0-a-1. Unzip 2CMDsandSetup.7z w/ Lenovo123 into USB Mem key
0-a-2. Modify SampleSetupPASWTestSuite.cmd by refering NW team batch named SetupPASWTestSuiteNW.cmd
0-a-3. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-a-4. Run the prepared Setupxxxx.cmd in Step 0-2.
 
0-b : Everything from Mem key 
0-b-1. Unzip 2CMDsandSetup.7z, EXECbatch.7z, AutoLogsNW.7z w/ Lenovo123 into USB Mem key
0-b-2. Modify SampleSetupPASWTestSuite.cmd by referring NW team batch named SetupPASWTestSuiteNW.cmd
              Modify team-id in “call INITtestFset.cmd NW
              Remove : call NWdriveMap.cmd (add "rem " for Remarks-out)
              Modify to "call d:\EXECbatch\INITautologs.cmd"  <== call x:\EXECbatch\INITautologs.cmd (USB Mem key drive letter)
0-b-3. Modify INITautologs.cmd
             Modify to “set SVRPATH=d:\” <== set SVRPATH=x:\ (USB Mem key drive letter)
0-b-4. Launch Command prompt as Admin by WIn+x, a, Alt+y
0-b-5. Run the prepared Setupxxxx.cmd in Step 0-2.
 
   
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2016mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-10-06 18:10:08 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-11-28 18:51:30 by Eiji Ogata. Review Comments(Returned): Reject by Komatsu-san's request.
Created last 2016-11-28 19:09:11 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-11-28 19:03:30.474, by Miyuki Komatsu_nw, Form in Summary
Modified last: 2016-11-28 19:01:52.896, by Miyuki Komatsu_nw, Form modification in Summary
Modified last: 2016-11-28 18:57:20.503, by Miyuki Komatsu_nw, Added modification for 0-b.
Modified last: 2016-11-28 18:26:01.194, by Miyuki Komatsu_nw, Add way to Setup Everything from Mem key
Modified last: 2016-10-06 16:36:34.291, by Miyuki Komatsu_nw, Put procedure in Summary

Version 1.2


Version 1.2
Created on 03/10/2016 09:59:26  by m_komatsu_nw
Last modified on  03/10/2016 10:03:38  by m_komatsu_nw
Summary
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       PASWTestSuite_2016mmdd.pptx
 
3. Password : Lenovo123

 

Preconditions
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-10-03 10:13:10 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-10-03 10:03:38.441, by Miyuki Komatsu_nw, EXECbatch and AutoLogsNW are attached.

Version 1.1


Version 1.1
Created on 09/09/2016 19:13:02  by m_komatsu_nw
Summary
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       NWdriverMap, NWdriveDelete
       INITautologs, INITxcopy
       EXECipconfig
Preconditions
Status:   New
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-09-28 17:52:09 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-09-14 18:45:29 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
This document is not yet modified.

Version 1


Version 1
Created on 07/09/2016 13:05:00  by m_komatsu_nw
Last modified on  07/09/2016 13:29:19  by m_komatsu_nw
Summary
1. Guide how to Setup up w/ common Account, PW, NW drive 
 
       EUT : Test target PC
       Server (PC) = SVR
           : If simple AP network, Server PC is required.
             Predecessor PC is recommended, because Performance comparison data can be collected.
                     
2. Guide common batch for Setup which will support logging w/ automatic date.time appending.
 
       NWdriverMap, NWdriveDelete
       INITautologs, INITxcopy
       EXECipconfig
Preconditions
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Configuration
Lessons Learned:No Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:ei
Objective:
CRITERIA
EUT QUANTITY
EQUIPMENT
Critical Attribute:
CONFIGURATION
REFERENCE PROCEDURE
STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

OTHER DETAILS
TEMS Reviewer Log:
Review Logs
Created last 2016-09-07 15:46:43 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-09-07 13:29:19.936, by Miyuki Komatsu_nw, Added Summary