Test Case

Show / Hide direct link   <MAIN> 5773PA: W10/8.1/7: WLAN Auto Connect after PM Events - PP-81360



Version 1.8
Created on 06/10/2017 09:35:07  by m_komatsu
Last modified on  06/10/2017 16:32:45  by m_komatsu
Summary
To verify WirelessLAN Auto Connection 
 1. In Roaming scenario
 2. PM Event Scenario (CloseRange)
 3. Each PM Event coverage (CloseRange)
Preconditions
1. Below reference Test Cases mandatory
  a. Setup EUT and ServerPC
      5768PA:W10_EUT and ServerPC Setup
  b. PM Events Operation and Priority
      5764PA:W10_PM Events Operation and Priority
  c. Ping Plot generation
      5819PA_PingLogs to Ping Plot
 
2. CloseRange Local Network 1 AP (DHCP), ServerPC(Previous Generation of PC w/RJ45 Ether Port) and EUT
  a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"
     RSSI can be confirmed by App, "WiFiInspector" by Xirrus, in PASW Test Suit
  b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy
  c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy.
Status:   In Review
Priority:   Mandatory
REVIEW CYCLE
Originator Miyuki Komatsu
Current Reviewer Eiji Ogata
Future Reviewer/s None
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Refer to Test Procedure attached
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied. (512MB or 1GB which need more than 1 min w/ 5GHz connection at CloseRange)
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Roaming scenario

AAAAA
2

 PM event scenario 1-1

AAAAA
3

 PM event scenario 1-2

AAAAA
4

 Each PM Events

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Keywords:   None
Requirements :   None
Attached files :
PingPlot 1 of 2 - __PingPlot_Template_...mmddyyyy_MMCPASW_Komatsu_RoamingScenario_[20171006]1of2.xlsx (236804 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 06/10/2017
PingPlot 2 of 2 - __PingPlot_Template_...mmddyyyy_MMCPASW_Komatsu_RoamingScenario_[20171006]2of2.xlsx (236975 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 06/10/2017
Test Procedure - 5773PA_W10_WLAN Auto Connect after PM Events_20170922.xlsx (204529 bytes, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet) 22/09/2017
Update History:
Modified last: 2017-10-06 16:32:45.980664, by Miyuki Komatsu, Uploaded __PingPlot_Template_...mmddyyyy_MMCPASW_Komatsu_RoamingScenario_[20171006]1of2.xlsx
Modified last: 2017-10-06 16:32:05.985503, by Miyuki Komatsu, Uploaded __PingPlot_Template_...mmddyyyy_MMCPASW_Komatsu_RoamingScenario_[20171006]2of2.xlsx
Version Update History:
2017-10-06 09:35:07, Version 1.8, m_komatsu, Add Ping Plot Template for Roaming scenario
2017-09-22 10:22:51, Version 1.7, m_komatsu, Update Test Procedure for PingXcopy prallel execution batch.
2017-08-31 10:30:34, Version 1.6, m_komatsu, Roaming Scenario was updated.
2017-07-06 09:18:09, Version 1.5, m_komatsu, Execute batch name in PASWTestSuit_20170706
2017-07-04 09:15:33, Version 1.4, m_komatsu, Add Roaming scenario
2017-02-15 13:51:48, Version 1.3, m_komatsu, Update Ping Plot Template to add Auto Text/Cell coloring, and both date formats yyyy/mm/dd and mm/dd/yyyy.
2016-12-19 19:09:01, Version 1.2, m_komatsu_nw, Add attachment PingPlotW7 and EXECbatch update for W7
2016-11-17 17:06:23, Version 1.1, m_komatsu_nw, Tentatively add W7 and W8.1

Other versions
Version 1.7


Version 1.7
Created on 22/09/2017 10:22:51  by m_komatsu
Last modified on  23/09/2017 09:21:40  by m_komatsu
Summary
To verify WirelessLAN Auto Connection 
 1. In Roaming scenario
 2. PM Event Scenario (CloseRange)
 3. Each PM Event coverage (CloseRange)
Preconditions
1. Below reference Test Cases mandatory
  a. Setup EUT and ServerPC
      5768PA:W10_EUT and ServerPC Setup
  b. PM Events Operation and Priority
      5764PA:W10_PM Events Operation and Priority
  c. Ping Plot generation
      5819PA_PingLogs to Ping Plot
 
2. CloseRange Local Network 1 AP (DHCP), ServerPC(Previous Generation of PC w/RJ45 Ether Port) and EUT
  a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"
     RSSI can be confirmed by App, "WiFiInspector" by Xirrus, in PASW Test Suit
  b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy
  c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy.
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Refer to Test Procedure attached
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied. (512MB or 1GB which need more than 1 min w/ 5GHz connection at CloseRange)
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Roaming scenario

AAAAA
2

 PM event scenario 1-1

AAAAA
3

 PM event scenario 1-2

AAAAA
4

 Each PM Events

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2017-09-22 10:47:30 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-09-23 09:21:40.718876, by Miyuki Komatsu, Update Test Procedure
Modified last: 2017-09-23 09:19:22.940635, by Miyuki Komatsu, Deleted 5773PA_W10_WLAN Auto Connect after PM Events_20170831.xlsx
Modified last: 2017-09-23 09:18:52.318713, by Miyuki Komatsu, Uploaded 5773PA_W10_WLAN Auto Connect after PM Events_20170922.xlsx

Version 1.6


Version 1.6
Created on 31/08/2017 10:30:34  by m_komatsu
Last modified on  01/09/2017 09:28:20  by m_komatsu
Summary
To verify WirelessLAN Auto Connection 
 1. In Roaming scenario
 2. PM Event Scenario (CloseRange)
 3. Each PM Event coverage (CloseRange)
Preconditions
1. Below reference Test Cases mandatory
  a. Setup EUT and ServerPC
      5768PA:W10_EUT and ServerPC Setup
  b. PM Events Operation and Priority
      5764PA:W10_PM Events Operation and Priority
  c. Ping Plot generation
      5819PA_PingLogs to Ping Plot
 
2. CloseRange Local Network 1 AP (DHCP), ServerPC(Previous Generation of PC w/RJ45 Ether Port) and EUT
  a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"
     RSSI can be confirmed by App, "WiFiInspector" by Xirrus, in PASW Test Suit
  b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy
  c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy.
Status:   New
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied. (512MB or 1GB which need more than 1 min w/ 5GHz connection at CloseRange)
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Roaming scenario

AAAAA
2

 PM event scenario 1-1

AAAAA
3

 PM event scenario 1-2

AAAAA
4

 Each PM Events

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2017-08-31 10:36:23 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-09-01 09:28:20.367183, by Miyuki Komatsu, Deleted 5773PA_W10_WLAN Auto Connect after PM Events_20170706.xlsx
Modified last: 2017-09-01 09:27:56.09961, by Miyuki Komatsu, Uploaded 5773PA_W10_WLAN Auto Connect after PM Events_20170831.xlsx

Version 1.5


Version 1.5
Created on 06/07/2017 09:18:09  by m_komatsu
Last modified on  06/07/2017 16:19:24  by m_komatsu
Summary
To verify WirelessLAN Auto Connection 
 1. In Roaming scenario
 2. PM Event Scenario (CloseRange)
 3. Each PM Event coverage (CloseRange)
Preconditions
1. Below reference Test Cases mandatory
  a. Setup EUT and ServerPC
      5768PA:W10_EUT and ServerPC Setup
  b. PM Events Operation and Priority
      5764PA:W10_PM Events Operation and Priority
  c. Ping Plot generation
      5819PA_PingLogs to Ping Plot
 
2. CloseRange Local Network 1 AP (DHCP), ServerPC(Previous Generation of PC w/RJ45 Ether Port) and EUT
  a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"
     RSSI can be confirmed by App, "WiFiInspector" by Xirrus, in PASW Test Suit
  b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy
  c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy.
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied. (512MB or 1GB which need more than 1 min w/ 5GHz connection at CloseRange)
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Roaming scenario

AAAAA
2

 PM event scenario 1-1

AAAAA
3

 PM event scenario 1-2

AAAAA
4

 Each PM Events

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2017-07-06 09:33:36 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-07-06 16:19:24.93419, by Miyuki Komatsu, Uploaded 5773PA_W10_WLAN Auto Connect after PM Events_20170706.xlsx
Modified last: 2017-07-06 16:18:44.428624, by Miyuki Komatsu, Deleted 5773PA_W10_WLAN Auto Connect after PM Events_20170704.xlsx

Version 1.4


Version 1.4
Created on 04/07/2017 09:15:33  by m_komatsu
Last modified on  04/07/2017 16:52:48  by m_komatsu
Summary
To verify WirelessLAN Auto Connection 
 1. In Roaming scenario
 2. PM Event Scenario (CloseRange)
 3. Each PM Event coverage (CloseRange)
Preconditions
1. Below reference Test Cases mandatory
  a. Setup EUT and ServerPC
      5768PA:W10_EUT and ServerPC Setup
  b. PM Events Operation and Priority
      5764PA:W10_PM Events Operation and Priority
  c. Ping Plot generation
      5819PA_PingLogs to Ping Plot
 
2. CloseRange Local Network 1 AP (DHCP), ServerPC(Previous Generation of PC w/RJ45 Ether Port) and EUT
  a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"
     RSSI can be confirmed by App, "WiFiInspector" by Xirrus, in PASW Test Suit
  b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy
  c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy.
Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied. (512MB or 1GB which need more than 1 min w/ 5GHz connection at CloseRange)
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Roaming scenario

AAAAA
2

 PM event scenario 1-1

AAAAA
3

 PM event scenario 1-2

AAAAA
4

 Each PM Events

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2017-07-05 02:46:28 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-07-04 16:52:48.605422, by Miyuki Komatsu, Uploaded 5773PA_W10_WLAN Auto Connect after PM Events_20170704.xlsx
Modified last: 2017-07-04 16:45:02.840685, by Miyuki Komatsu, Deleted 5773PA_W10_WLAN Auto Connect after PM Events_20161117.xlsx
Modified last: 2017-07-04 16:44:47.266765, by Miyuki Komatsu, Deleted EXECbatch_20161221_tmpW7.7z
Modified last: 2017-07-04 16:44:33.281909, by Miyuki Komatsu, Deleted 00PingPlot_Template_...mmddyyyy_MMCPASW_Komatsu[20170217].xlsx
Modified last: 2017-07-04 16:44:20.325483, by Miyuki Komatsu, Deleted 00PingPlot_Template_...yyyymmdd_MMCPASW_Komatsu(20170217).xlsx
Modified last: 2017-07-04 16:42:00.988018, by Miyuki Komatsu
Modified last: 2017-07-04 16:41:34.264969, by Miyuki Komatsu
Modified last: 2017-07-04 16:36:57.557482, by Miyuki Komatsu, Add Roaming scenario

Version 1.3


Version 1.3
Created on 15/02/2017 13:51:48  by m_komatsu
Last modified on  15/02/2017 13:54:35  by m_komatsu
Summary

Tentatively, add W7 and W8.1 detail procedure might be different.

1. To verify WirelessLAN Auto Connection after PM Event (which scenario is defined in 5764PA_W10_PM Events Operation and Priority)

Preconditions

1. CloseRange Local Network 1 AP (DHCP), PCasServer(Previous Generation of PC w/RJ45 Ether Port) and EUT

      a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"

      b. 802.11n, 5Ghz/2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy

      c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other iwll be requested, The Condition to be mentioned in Remarks in Test Strategy.

Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied.
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Auto Connect

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2017-02-15 17:30:04 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2017-02-17 18:12:09 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2017-02-15 13:54:35.689, by Miyuki Komatsu, 5Ghz

Version 1.2


Version 1.2
Created on 19/12/2016 19:09:01  by m_komatsu_nw
Summary

Tentatively, add W7 and W8.1 detail procedure might be different.

1. To verify WirelessLAN Auto Connection after PM Event (which scenario is defined in 5764PA_W10_PM Events Operation and Priority)

Preconditions

1. CloseRange Local Network 1 AP (DHCP), PCasServer(Previous Generation of PC w/RJ45 Ether Port) and EUT

      a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"

      b. 802.11n, 2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy

      c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other iwll be requested, The Condition to be mentioned in Remarks in Test Strategy.

Status:   New
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied.
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Auto Connect

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2016-12-22 12:01:29 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-12-19 20:08:09 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
This document is not yet modified.

Version 1.1


Version 1.1
Created on 17/11/2016 17:06:23  by m_komatsu_nw
Last modified on  24/11/2016 14:15:12  by m_komatsu_nw
Summary

Tentatively, add W7 and W8.1 detail procedure might be different.

1. To verify WirelessLAN Auto Connection after PM Event (which scenario is defined in 5764PA_W10_PM Events Operation and Priority)

Preconditions

1. CloseRange Local Network 1 AP (DHCP), PCasServer(Previous Generation of PC w/RJ45 Ether Port) and EUT

      a. AP and EUT distance should be around 1 - 1.5 m. RSSI more than -50dBm, e.g. -40, -32... <== we call it "CloseRange"

      b. 802.11n, 2.4Ghz in default, if other will be requested, The Condition to be mentioned in Remarks in Test Strategy

      c. WPA/PSK(AES) or WPA2/PSK(AES) in default, if other iwll be requested, The Condition to be mentioned in Remarks in Test Strategy.

Status:   New
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA
Ping server_ip -l 65500 -n 128 :
TimeOut : Less than 4 / 128 | Exception : Less than 4 / 128 | OtherError : Less than 4 / 128 in PingPlot form
Xcopy :
All Files(s) in shared_folder\FILESxcopy copied.
EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win81-64bit Win81-32bit Win10-64bit Win7- 64bit Win7- 32bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Auto Connect

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2016-11-17 19:41:45 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-11-24 14:44:57 by Eiji Ogata. Review Comments(Review Complete): review completed.
Created last 2016-11-18 18:53:28 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-11-24 14:15:12.271, by Miyuki Komatsu_nw
Modified last: 2016-11-24 14:15:05.966, by Miyuki Komatsu_nw
Modified last: 2016-11-17 18:47:05.788, by Miyuki Komatsu_nw, Add OS, W7 and W8.1 Add detail condition, Criteria

Version 1


Version 1
Created on 13/09/2016 14:26:48  by m_komatsu_nw
Last modified on  20/09/2016 16:17:06  by m_komatsu_nw
Summary

1. To verify WirelessLAN Auto Connection after PM Event (which scenario is defined in 5764PA_W10_PM Events Operation and Priority)

Preconditions

Refer to Attachment

Status:   Review Complete
Priority:  
BASIC INFORMATION
Section:S/W Test Require attachment:No
Team:Network Group:Reliability
Lessons Learned: Phase:FVT, SVT, Post GA, SIT
Locations:Inhouse: AWS, Inhouse: Cambridge, Compal, Quanta, Wistron Owned By:Eiji Ogata/LENOVO
Objective:WirelessLAN Automatic Connect
CRITERIA

Refer to Attachment

EUT QUANTITY

Refer to NW Config in each project Test Plan

EQUIPMENT

Refer to Test Procedure attached

Critical Attribute:NIC, Driver, other Wireless Driver, PM Driver, BIOS
CONFIGURATION

Refer to NW Config in each Project Test Plan

REFERENCE PROCEDURE

Refer to Attachment

STATISTIC INFO
Operating System Win10-32bit Win10-64bit Total
Test Points
Duration
Workload
# Step actions Win81-64bitWin81-32bitWin10-64bitWin7- 64bitWin7- 32bit
1

Auto Connect

AAAAA
DETAILS
ATTENTION!! Please follow below information.
1. Please check Error and Warning message in Event Viewer before you start the test case and after you complete the test case, and report it to your team lead, then arrange to open defect, if needed.

2. Perform All Test in Battery Mode (Some of the test items need to perform in AC Mode, follow each Test Case).

3. All Test Activity should be performed with AMT Enabled as Default (applicable on vPro enabled systems).

4. Please check Usability / Cosmetic issues (correct sentence/appropriate display/etc.) and open defect, if needed.

1. Event Viewer contents = in Logs_xxx folder Initial and Final

2. PM Event = Defined in 5764PA W10 PM Events Operation and Priority (How to Suspend, How to Resume)

3. Confirm AMT Enabled (if not in Default, please set it manually)

4. Any finding of Customer incovenience, lead misunderstanding/confusion to be reported and Memo in Test Report Tab in the attached Procedure xlsx file

OTHER DETAILS

Refer to Test Procedure attached.

TEMS Reviewer Log:
Review Logs
Created last 2016-09-20 17:33:34 by Eiji Ogata. Review Comments(Review Complete): review completed.
Keywords:   None
Requirements :   None
Version Update History:
Modified last: 2016-09-20 16:17:06.007, by Miyuki Komatsu_nw
Modified last: 2016-09-20 16:08:45.113, by Miyuki Komatsu_nw, few correction
Modified last: 2016-09-20 16:03:26.013, by Miyuki Komatsu_nw, Initial
Modified last: 2016-09-13 14:48:33.15, by Miyuki Komatsu, Draft